License Plate Lamp
To replace one of these bulbs, do the following:
1. Remove the two screws holding the
license plate lamp lens.
2. Pull the lens away from the lamp assembly.
3. Pull the old bulb from the bulb socket, keeping
the bulb straight as you pull it out.
4. Install the new bulb.
5. Replace the lamp assembly lens and tighten
the screws.
Replacement Bulbs
Exterior Lamp
Front Parking and
Sidemarker Lamp
Front Turn Signal Lamp
License Plate Lamp
Halogen Headlamps
High-Beam
Low-Beam
Rear Turn Signal and Taillamps
For replacement bulbs not listed here, contact
your dealer.
Bulb Number
194
3757 A
W5W
9005 HB3
9006 HB4
3057
407