Buick 2007 Rainier Owner's Manual page 12

Easy Exit Seat
The control for the easy exit seat function is
located on the driver's door below the memory
buttons 1 and 2. The easy exit seat button is
used to program and recall the desired driver's
seat position when exiting or entering the
vehicle. The mirrors, power lumbar, recline,
and adjustable pedals, if equipped, positions
will not be stored or recalled when using the
easy exit seat function. The seat position can
be saved for up to two drivers.
12
To store the easy exit seat position, do the
following:
1. Press and release the 1 or 2 button of the
memory control for less than three seconds.
The seat will move to the stored memory
position.
2. Adjust the seat to the desired exit position.
3. Press and hold the easy exit seat button
for more than three seconds. A double
chime will sound to let you know that the
position has been stored for the selected
button 1 or 2.
To repeat the procedure for a second driver,
follow the preceding steps, but press the other
numbered memory control button.