Buick 2007 Rainier Owner's Manual page 290

When you first start your vehicle and begin to drive
away, the system performs several diagnostic
checks to insure there are no problems. You may
hear or feel the system working. This is normal and
does not mean there is a problem with your vehicle.
If driving conditions delay system initialization, the
STABILITRAK NOT READY message may be
displayed. If this is the case, your vehicle does not
need servicing.
For more information on the stability messages,
see DIC Warnings and Messages on page 202.
You may also feel or hear the system working.
This is normal.
290
®
When the StabiliTrak
system is both on and
actively controlling
the stability of the
vehicle, the StabiliTrak
light will blink for the
duration of the event.
®
The StabiliTrak
operation: STABILITRAK ON, TRACTION
CONTROL OFF, and STABILITRAK OFF.
STABILITRAK ON — The vehicle will default to
STABILITRAK ON every time the driver starts the
vehicle. The StabiliTrak
DIC messages will be displayed.
TRACTION CONTROL OFF — The driver can
®
modify the engine speed management system by
momentarily pressing the StabiliTrak
on the transmission shift handle. The StabiliTrak
light will come on and TRACTION CONTROL
OFF will be displayed. For vehicles without a
DIC, the StabiliTrak
Momentarily pressing the StabiliTrak
again will return the system to the STABILITRAK
ON mode.
The StabiliTrak
button is located on
the transmission
shift handle.
system has three modes of
®
light will be off and no
®
button
®
indicator light will come on.
®
button
®
disable
®