Headlamps, Front Turn Signal, And Parking Lamps; Taillamps And Turn Signal Lamps - Buick 2007 Rainier Owner's Manual

Headlamps, Front Turn Signal, and
Parking Lamps
To replace a bulb, do the following:
1. Open the hood. See Hood Release on
page 364 for more information.
2. Remove the grille by grasping and pulling it
forward.
3. Lift the two headlamp retaining clips.
4. Pull the headlamp assembly away from the
vehicle to access the electrical connectors.
5. Remove the cover from the headlamp bulb.
6. Disconnect the wiring harness.
7. Remove the bulb socket by turning it
counterclockwise. Pull the bulb from the
socket.
8. Install the new bulb and turn clockwise to
secure it.
9. Reinstall by reversing Steps 1 through 6.
10. Press down on the headlamp retaining clips to
secure the headlamp assembly.

Taillamps and Turn Signal Lamps

To replace a taillamp or turn signal bulb, do
the following:
1. Open the liftgate. See Liftgate/Liftglass on
page 102 for more information.
3. Pull the taillamp assembly away from the
vehicle.
2. Remove the two
screws from the
taillamp assembly.
405