WilTec TIG180 Operation Manual page 10

Installation picture
№ Name
1 Pressure reducing valve
2 Shielding gas cylinder
3 Work piece
Operation
Inert gas arc welding
Caution: Errors in the shielding gas supply!
The unhindered shielding gas supply from the shielding gas cylinder to the welding torch is basic for
optimal welding results. In addition, a blocked shielding gas supply can destroy the welding torch!
•
Make all shielding gas connections gas-tight!
•
Before connecting the pressure reducer to the shielding gas cylinder, briefly open the gas cyl-
inder valve to blow out any dirt.
•
Tighten the pressure reducer to the gas cylinder valve so that it is gas-tight.
•
Screw the union nut of the gas hose connection to the "outlet side of the pressure reducer."
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
№ Name
4 Welding torch
5 Site power
Item 61707, 61708 Page 10
05 2021-1