MadgeTech DHS Quick Start Manual

DHS
Dry Heat Sterilization Data Logging System
The DHS Data Logging System for Dry Heat Sterilization is an all-in-one depyrogenation
solution that comes equipped with:
• HiTemp140-M12, High Temperature Data Logger
• 36 inch Glass Braided RTD depyrogenation probe with M12 connector and flat
probe tip
• ThermoVault Max, Extreme Temperature Thermal Barrier
This system is capable of withstanding and measuring temperatures up to 400 °C,
allowing it to record throughout the entire depyrogenation process. The HiTemp140-M12
data logger features the popular rugged steel body design of the HiTemp140 data
logger series with the flexibility to utilize dozens of RTD probe options with M12
connection compatibility.
The MadgeTech software allows for fast and easy data logger configuration. Simply
insert the data logger into the IFC400 or IFC406 docking station (sold separately),
choose either immediate or delay start and the desired reading rate. Insert the data
logger onto the ThermoVault Max enclosure and screw the cap back on securely. The
device is ready to be deployed.
SPECIFICATIONS
Specifications are subject to change without notice. Specific warranty remedy limitations apply.
madgetech.com
Call (603) 456-2011 or go to
TEMPERATURE
Temperature Sensor
36 inch Glass Braided RTD depyrogenation probe
Temperature Resolution 0.0001 Ω, 0.01 °C (0.02 °F)
Temperature Accuracy ±1.2 °C (-200 °C to +400 °C)
GENERAL
Memory
43,690 readings
Reading Rate
4 readings per second up to 1 reading every 24 hours
Computer Interface IFC400 OR IFC406 USB docking station required; 125,000 baud
Typical Battery Life
1 year typical (1 minute reading rate at +25 °C/+77 °F)
Operating Environment
Refer to the Time vs. Temperature Chart on next page
Barrier Material
316 Stainless Steel, PTFE, Silicone
Barrier Weight 3.0 lb (1350 g)
IP Rating This device is not IP rated and is for use in dry applications only
Approvals CE
for details.
Features
• 316 Stainless Steel Enclosure
• Small 1.75 inch Diameter
• Withstands temperatures up to +400 ºC
for 60 minutes continuously
Applications
• Extreme Temperature Monitoring
• Depyrogenation
• Dry Heat Sterilization
• Autoclave Validation