Summary of Contents for Winterhalter PAY PER WASH UC V01 Series
Page 1
Supplementary instructions to the operating instructions for Winterhalter PAY PER WASH warewashers This manual applies to all PAY PER WASH machines. However, individual steps are machine-dependent. This sub-chapter thus contains several sections on distinguishing between the following machines: • UC Series V01, PT Series V01 (blue display) •...
Page 2
General 1 General If you have a PAY PER WASH machine, this can be identified in the main level: UC-2009, PT Series UC-2018 You will find all the special functions associated with PAY PER WASH in these instructions. Information on the general functions of the machine can be found in the general operating instructions: •...
Page 3
Portal for the purchase of wash codes Display previously generated wash codes Code index = Sequence for entry at the warewasher You can see which codes you have already used in the information area of your warewasher ( 3.2.1). Generate a new personalised QR code New personalised QR code You can use this code to purchase wash codes directly without having to enter your customer information...
Page 4
PAY PER WASH functions on the warewasher 3 PAY PER WASH functions on the warewasher UC Series V01, PT Series V02: Fehler! Verweisquelle konnte nicht gefunden werden. UC Series V01, PT Series V01: Fehler! Verweisquelle konnte nicht gefunden werden. UC Series V02, PT Series V02 3.1.1 PAY PER WASH menu Enter wash codes...
Page 5
PAY PER WASH functions on the warewasher 3.1.2 Entering a wash code INFO Wash codes can be entered at any time, even if there are still wash cycles available. ➢ Press button (1). ➢ Enter the desired code (for example = Enter wash code code 2).
Page 6
PAY PER WASH functions on the warewasher UC Series V01, PT Series V01 ➢ Press button (1). Information area ( 3.2.1) Enter the wash code ( 3.2.2) 3.2.1 Information area ➢ Press button (1). The information area is divided into the following three sections: Used wash codes: PAY PER WASH info Machine No.: 1142802...
Page 7
PAY PER WASH functions on the warewasher 3.2.2 Entering a wash code Wash codes can be entered at any time, even if there are still wash cycles available. ➢ Press button (2). ➢ Enter the desired code (for example = code 5). IMPORTANT Adhere to the sequence of the generated codes.
Page 8
Observe the code index. The touch screen has been replaced but the wash Request that Winterhalter Sales or the service partner codes that are generated in the portal are for the responsible registers the new touch screen in the portal.