Advertisement
Quick Links
Location of
Chair Back
Clips
1
2
There are two No Arm Back Clips locate on the backrest of the chair. If you were sitting
in the chair, rotate the clip to the right clockwise and the clip to the left counterclockwise.
Pull the backrest up away from the frame and seat assembly. The clips may fall out when
the backrest comes off the frame. If upholstery pad needs to be change over to the new
poly back, go to frame 3. If upholstery pad don't have to be changed over to the new
poly back, go to frame 5.
Remove the Four
Screws
Poly Back
Upholstered
Pad Back
4
3
To replace the upholstery pad on the poly back, four screws that are located on the
opposite end of the pad must be taken out. Separate the upholstered pad from the poly
back. Fetch the new poly back and align the screw holes of the poly back to the threaded
holes on the upholstery pad. Replace the four screws on back of poly back.
Advertisement
Related Manuals for KI Rapture Stack Chair
Summary of Contents for KI Rapture Stack Chair
- Page 1 Location of Chair Back Clips There are two No Arm Back Clips locate on the backrest of the chair. If you were sitting in the chair, rotate the clip to the right clockwise and the clip to the left counterclockwise. Pull the backrest up away from the frame and seat assembly.
- Page 2 Clip Positions Push the backrest down when clips are in position Fetch the new backrest that will be assembled on the existing frame and seat assembly. Slide the backrest down onto the frame until the frame tubing comes up to the bottom of the clip cutout positions on the back.