Rdering Information And Packaging; Packaging; Packaging Details - Danfoss MLZ Selection & Application Manuallines

A
PPLICATION GUIDELINES

Packaging

Single pack
Industrial pack

Packaging details

Code number
Pack type
Compressors per pallet
Static stacking of pallets **
Run capacitor (for single phase models)
Screw for earth connection
4 grommets per compressor
4 assemblies of self tapping US thread bolt +
washer + sleeve per compressor
4 extra sleeves per compressor
* Quantity for full pallets. Single packs can be ordered per 1.
** Stacking only allowed for full pallets with identical products per pallet
36
O

RDERING INFORMATION AND PACKAGING

Compressors are packed individually in a card-
board box. They can be ordered in any quantity.
Minimum ordering quantity = 1. As far as possible,
Danfoss will ship the boxes on full pallets of 6 or 9
compressors according below table.
• Each box also contains following accessories:
• 4 grommets
• 4 assemblies of self tapping US thread bolts,
washers and sleeves
• 4 additional sleeves
• 1 screw for earth connection
• Depending on model and shipping type a run
capacitor may be included (see table).
Compressors are not packed individually but are
shipped all together on one pallet. They can be or-
dered in quantities of full pallets only, multiples of
12 or 16 compressors, according below table.
Each industrial pack pallet contains following ac-
cessories:
• 4 grommets per compressor
• 4 sleeves per compressor
Optimized for overseas container loading
Industrial pack
16
4
Not included
Not included
Included
Not included
Included
FRCC.PC.016.A1.22
US pallets
Optimized for overseas container loading & Euro-
120U....
Single pack
9 *
4
Not included
Included
Included
Included
Included
Danfoss pallets
pean storage racks
121U....
Industrial pack Single pack
12 6 *
4 4
Not included Included
Included Included
Included Included
Not included Included
Included Included