Table of Contents
Advertisement
3.11
Detect C:
The Detect C: option is selected by choosing the "Detect C:" icon from the Utility section of the AMI WinBIOS Setup
main menu selection screen.
If drive C: is an IDE drive, the hard disk drive parameters for drive C: are automatically detected and reported to the
Hard Disk Drive C: screen in Standard Setup, so you can easily configure drive C:. This option enables (turns on) or
disables (turns off) the Advanced Power Management (APM) function. The settings are Disabled or Enabled.
3.12
Detect D:
The Detect D: option is selected by choosing the "Detect D:" icon from the Utility section of the AMI WinBIOS Setup
main menu selection screen.
If drive D: is an IDE drive, the hard disk drive parameters for drive D: are automatically detected and reported to the
Hard Disk Drive C: screen in Standard Setup, so you can easily configure drive D:. This option enables (turns on) or
disables (turns off) the Advanced Power Management (APM) function. The settings are Disabled or Enabled.
3.13
Color Set
The Color Set Setup option is selected by choosing the "Color Set" icon from the Utility section of the AMI WinBIOS
Setup main menu selection screen. This option specifies the color of the AMI Win BIOS Setup screen. The settings are
LCD, Army, Pastel, or Sky.
3.14
Password Setup
The Password Setup option is selected by choosing the "Password" icon from the Security section of the AMI WinBIOS
Setup main menu selection screen.
31
Advertisement
Table of Contents
