Table of Contents
Advertisement
·
Suspend switch (JP25) is pressed.
·
Expiration of the internal Green PC Timer. The Green PC Timer is software programmable which can
configure in the "Power Management Setup" option of the BIOS CMOS setup. (Refer to 3.10 Power
Management Setup). The power management feature will be enabled as default, however the timing
may differ due to production control. It is recommended that you re-adjust these timings according to
your personal requirements/set-up.
·
Execution of the system hot key for power down sequencing <CTRL> <ALT> <\>.
Through system activity monitoring and management, the PT-431A will not go into Green PC mode if any of the
following activity is detected:
·
PCI slave activity
·
LPT port activity
·
COM port activity
·
ISA master activity
·
IDE activity
·
Floppy activity
·
VGA activity
·
Keyboard activity
For further details on the ECO PAD or 'PTxxxx' VGA cards please contact your local dealer or sales representative for
assistance.
6
Advertisement
Table of Contents
