Table of Contents
Advertisement
·
When this option is enabled, the WinBIOS memory test is performed on all system memory. When this option is
disabled, the memory test is done only on the first 1 MB of system memory. The settings are Enabled or Disabled.
Memory Test Tick Sound
·
This option enables (turns on) or disables (turns off) the ticking sound during the memory test. The settings are
Enabled or Disabled.
Parity Error Check
·
This option enables or disables parity error checking for system RAM. The settings are Enabled (all system RAM
parity is checked) or Disabled (parity is checked only on the first 1 MB of system RAM).
Hit "DEL" Message Display
·
Disabling this option prevents -
The settings are Enabled or Disabled.
Extended BIOS RAM Area
·
Specify in this option if the top 1 KB of the system programming area beginning at 639K or 0:300 in the system
BIOS area in low memory will be used to store hard disk information. The settings are Top 1K or 0:300.
Wait for <F1> If Any Error
·
WinBIOS POST runs system diagnostic tests that can generate a message followed by - P
If this option is enabled, WinBIOS waits for the end user to press <F1> before continuing. If this option is
-
disabled, WinBIOS continues the boot process without waiting for <F1> to be pressed. The settings are Enabled or
Disabled.
System Boot Up Num Lock
·
When On, this option turns on / off Num Lock when the system is powered. The settings are On or Off.
Floppy Drive Seek At Boot
·
When this option is enabled, WinBIOS performs a Seek command on floppy drive A: before booting the system.
The settings are Enabled or Disabled.
System Boot Up Sequence
·
This option sets the sequence of boot drives (either floppy drive A: or hard disk drive C:) that WinBIOS attempts to
boot from after POST completes. The settings are C:,A: or A:,C:.
System Boot Up CPU Speed
·
This option specifics the speed of the CPU at system boot time. The settings are High or Low.
External Cache
·
This option enables (turns on) or disables (turns off) the secondary cache memory. The settings are Disabled,
Enabled.
Internal Cache
·
This option enables (turns on) or disables (turns off) the CPU built-in cache memory. The settings are Disabled,
Enabled.
Turbo Switch Function
·
When this option is set to Enabled, the externally-mounted turbo switch is enabled. The settings are Enabled or
Disabled.
Password Checking
·
This option enables the password check option every time the system boots or the end user runs Setup. If Always is
chosen, a user password prompt appears every time the computer is turned on. If Setup is chosen, the password
prompt appears if AMI WinBIOS Setup is executed.
Video Shadow C000,16K
·
When this option is set to Enabled, the video ROM area from C0000h - C3FFFh is copied (shadowed) to RAM for
faster execution.
Shadow C800,16K
·
This option enables (turns on) or disables (turns off) the shadowing function of the contents of ROM area named in
the option title. The settings are Disabled, Enabled.
Shadow CC00,16K
·
This option enables (turns on) or disables (turns off) the shadowing function of the contents of ROM area named in
the option title. The settings are Disabled, Enabled.
Shadow D000,16K
·
This option enables (turns on) or disables (turns off) the shadowing function of the contents of ROM area named in
the option title. The settings are Disabled, Enabled.
Hit <DEL> if you want to run Setup
24
- from appearing when the system boots.
ress <F1> to continue
Advertisement
Table of Contents
