Table of Contents
Advertisement
·
This option enables or disables the caching function of the contents of the video BIOS EPROM. The settings are
Enabled or Disabled.
Resource Lock for Local DRAM
·
This option enables or disables the resource lock for local DRAM. The settings are Disabled or Enabled.
Host-to-PCI POST Write wait state
·
This option specifies the wait state for host-to-PCI devices. The settings are 0 or 1.
Host -to-PCI Burst Write
·
This option enables or disables the host-to-PCI burst write. The settings are Disabled or Enabled.
Host-to-DRAM Burst Write
·
This option enables or disables the host-to-DRAM burst write. The settings are Disabled or Enabled.
LDEV# Sampling Point
·
This option specifies the sampling time of the LDEV# signal. The settings are 1T2 or 2T2.
PCI Parity Check
·
This option enables or disables the parity check for PCI devices. The settings are Disabled or Enabled.
On Board DRAM Parity Check
·
This option enables or disables the hardware DRAM parity check function. The settings are Disabled or Enabled.
De-Turbo Speed
·
This option specifies the speed of normal mode. The settings are 1/3 or 1/6.
I/O Recovery Time Control
·
This option specifies the I/O recovery time period. The settings are 2BCLKs, 4BCLKs, 8BCLKs or 12BCLKs.
POST Write Buffer
·
This option enables or disables the PCI pose write buffer. The settings are Disabled ot Enabled.
Slow Refresh
·
This option specifies the system refresh rate. The settings are Disabled or Enabled.
Bus Park
·
This option enables or disables the PCI Bus Park function. The settings are Disabled or Enabled.
Bus/ Resource Lock Option
·
This option specifies the lock option for Bus or resource. The settings are BUS or Resource.
Slot# of NCR810 Use AD#17
·
This option specifies the NCR SCSI device location. The settings are Slot1, Slot2, Slot3 or Slot4.
PCI IDE card Present on
·
This option specifies the presence of PCI IDE card, the default setting is AUTO.
PCI IDE IRQ
·
This option specifies the trigger method of the PCI IRQ signal, the default setting is Edge.
PCI Primary IDE IRQ
·
This option specifies the IRQ s ignal for the on board primary IDE, the default setting is INTA.
PCI Secondary IDE IRQ
·
This option specifies the IRQ signal for the secondary IDE, the default setting is INTB.
On board IDE
·
This option enables or disables the on board IDE function. The settings are Disabled or Enabled.
On board IDE Mode
·
This option specifies the on board IDE to support which IDE mode. The settings are Disabled, Mode1, Mode2,
Mode3.
Video ROM Cache C000, 16K
·
This option enables (turns on) or disables (turns off) the caching function of the contents of ROM area named in the
option title. The settings are Disabled, Enabled.
Video ROM Cache C400, 16K
·
This option enables (turns on) or disables (turns off) the caching function of the contents of ROM area named in the
option title. The settings are Disabled, Enabled.
Adaptor ROM Cache C800, 16K
·
This option enables (turns on) or disables (turns off) the caching function of the contents of ROM area named in the
option title. The settings are Disabled, Enabled.
27
Advertisement
Table of Contents
