GE TONOPORT V Service Manual page 21

7.1.2 Settings for Telix for Windows (Hyperterminal for NT does
not work)
Revision H
Firmware Loading Procedure for FW1.4: Preparation
Extract all TONOPORT V, FW1.4 Firmware files into one directory (e.g.
C:\tonoport\V1.4) by starting: FIRMWARE TONOPORT V FW14.exe
Load all files from the Telix program into the same directory on the Hard Disk
Start the Telix program (\telix.exe)
NOTE
Enter <ALT> + <p> to select the COM port.
Enter <ALT> + <o> to select Ascii transfers. Select F - Line pacing ........ 2.
Enter <ALT> + <s> and select ASCII to transfer files to TONOPORT.
Delete screen with <ALT> + <c>.
Telix can be terminated with <ALT> + <x>.
TONOPORT V
2001589-023
7-3