Egon+ Board Behavior - Simrad Naviop Loop M User Manual

Diagnostic page
When a fault condition appears (e.g. a fuse is blown), the following happens:
•
the relevant diagnostic page button (A) turns red
•
the channel with fault will be red on the relevant diagnostic pages
Communication error
If a communication error occurs, a text will be shown on the relevant diagnostic page instead
of an overview of the fuses and relays layout illustration.

Egon+ board behavior

If the MFD is turned off, the relays will keep their state until the Egon+ board is powered off.
If the power to the Egon+ board is turned off the relays will be deactivated/opened. After a
power up, all relays will be open.
Operation | Loop M User Manual
A
| 29