The Naviop Application Interface - Simrad Naviop Loop M User Manual

Fuses
The fuse button (A) location in the control bar depends on the settings in the configuration
file. Refer to "Configuration" on page 21.
If one or more fuses are broken, the fuse button will have a red indication. The fuse bar will
indicate the fuses that are broken. The red indication is removed when all broken fuses are
replaced.
¼ Note:
The fuses bar displays diagnostic information for fuse outputs, not for fuses protecting
a relay channel/output. The fuse outputs cannot be operated and are powered as long as the
fuse is ok.
Communication error
If a communication error occurs, all button and fuses status indicators will turn red.

The Naviop application interface

When a Loop system is connected to your MFD, a Naviop icon will be available on the home
screen.
Select the icon to display the home page for the Loop system.
Navigating the system
A
The number of available pages depend on what system you have.
B
Select a page menu button to access the page. The active page is highlighted.
A Home page
C
B Control page one
D
Control page for equipment connected to Egon+ board one (CAN ID:1)
E
C Control page two (Loop M+ only)
Control page for equipment connected to Egon+ board two (CAN ID:2)
D Diagnostic page one
Status of Egon+ board one (CAN ID:1)
Operation | Loop M User Manual
A
| 27