How To Install The Loop M Software - Simrad Naviop Loop M User Manual

24 |
D Image
Select an appropriate image for the connected equipment. When the icon is clicked a dialog
with available options will be shown. This image will be shown in the MFD software.
E Description
Enter a name that describes the connected equipment. This name will be shown in the MFD
software.
F Enable
Enable/Disable the channel/output.
G Toggle (not applicable for fuse outputs)
If selected, the button in the MFD software will be a toggle button. If not selected, the button
in the MFD software will be a momentary button (the output is active as long as the button is
pressed).
H Bypass/Ext (not applicable for fuse outputs)
Select if a bypass is connected to the relay or if the connected device can be manually or
automatically controlled by an external switch. For connection examples, refer to "Connection
examples" on page 17.

How to install the Loop M software

1
Select the Set App to open the configurator.
2
Open the Settings dialog and make the appropriate settings.
3
Configure channels/output settings.
4
Download the Zip file containing all necessary files for the installation.
5
Extract the files created at step 4 to the root folder of a USB memory stick.
6
Make sure that the MFD and the OP-Box Loop M/M+ are turned on and connected to the
same Ethernet network.
7
Open the Loop M application from the MFDs home page.
8
Plug the USB memory stick into OP-Box Loop M/M+ using the USB A Female to Mini USB B
Male OTG adapter cable.
9
Wait until the updating popup appears and follow the instructions on the screen.
10
Extract the files created at step 4 to the root folder of a storage device that fits your MFD.
11
Make sure that the MFD is turned off and insert the storage device in it.
Configuration | Loop M User Manual