Additional information
You can select a display of more detailed infor-
mation on the maintenance scope on the Con-
trol Display. For operating principle refer to
page 16.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Info sources" and press the control-
ler.
4.
Select "Service Info" and press the control-
ler.
5.
Change to upper field if necessary. Turn the
controller until "Service requirements" is
selected and press the controller.
6.
Select "Status" and press the controller.
The display shows a list of selected service and
maintenance procedures, as well as legally
mandated inspections.
You can request more detailed information on
every entry.
Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG
Select the entry and press the controller.
To exit the menu:
Select the arrow and press the controller.
Symbols
No service is currently required.
The deadline for service or a legally man-
dated inspection is approaching. Please
arrange a service appointment.
The service deadline has already passed.
Entering deadlines for legally required
inspections*
Make sure the date on the Control Display is set
correctly, refer to page 76, otherwise the effec-
tiveness of CBS Condition Based Service is not
ensured.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Info sources" and press the control-
ler.
4.
Select "Service Info" and press the control-
ler.
5.
Change to upper field if necessary. Turn the
controller until "Service requirements" is
selected and press the controller.
6.
Select "Status" and press the controller.
71