BMW 2009 M5 Owner's Manual page 55

3. Select "MDrive" and press the controller.
The functions contained in MDrive are dis-
played:
> "SMG Drivelogic"
Sequential Manual Transmission with
Drivelogic: shifting modes and Drivel-
ogic driving programs, refer to page
> "EDC"
Programs of the Electronic Damping
Control, refer to page
> "DSC"
Dynamic Stability Control and
M Dynamic Mode, refer to page
> "POWER"
Programs of the M Engine Dynamics
Control, refer to page
*
>
"Backrest"
Programs of the active backrest width
adjustment, refer to page
> "Head-Up Display"
Views of the Head-Up Display, refer to
page 90
You can reset all settings for MDrive to the
default values:
> "Reset to default"
4. Select the desired function.
Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG
62
83
81
59
44
*
5. Press the controller.
6. Turn the controller to select the desired set-
ting.
"Unchanged" retains the current setting
made outside of MDrive.
7. Press the controller.
The setting is stored for the remote control cur-
rently in use.
Activating settings
Press the button on the steering wheel.
The indicator lamp in the instrument
cluster lights up. The settings made on
the Control Display for the functions
contained in MDrive are active.
Pressing the button again deactivates MDrive.
If the indicator lamp flashes after the but-
ton was pressed, MDrive was unable to
respond because the ABS Antilock Brake Sys-
tem or DSC Dynamic Stability Control are cur-
rently regulating driving stability. Press the
button again when the indicator lamp no
longer flashes.<
Even with MDrive activated, you can change
individual settings outside MDrive, e.g. with the
buttons in the center console. To reactivate all
settings made for MDrive on the Control Dis-
play: press the button twice.
53