5/28/22, 10:13 AM
34 – Installing the trim panel for the rear left and right water channel
Description is for left component only. Procedure on the right side is identical.
Additional Information
Overview of Tightening Torques
Headlining to frame
Oval-head screw
End fitting to seat mechanism
Flat-head
screwM10
Roof function centre
https://www.newtis.info/tisv2/a/en/g20-m340i-xdrive-lim/repair-manuals/51-body-equipment/51-44-headlining/1Vndqfc83F
Removing and installing/replacing headlining (for equipment specification with slide/tilt sunroof)
Renew screw.
Check the clips (1) and guides (2) on the trim panel for
the water channel (3) for damage.
Clip in the trim panel for the water channel (1).
Tightening torque
Tightening torque
Tightening torque
Used in step
17
1,5 Nm
Used in step
26
42 Nm
Used in step
28
1,2 Nm
34/39