Cd Player And Cd Changer; Additional Information - BMW 3 SERIES Owner's Manual

To store a channel:
1.
Press the button.
2.
Press the button as often as
necessary until the desired memory level,
SAT 1 or SAT 2, is reached.
3.
...
desired button until the channel starts to
play again after a brief interruption.
Changing to the current channel
Press the button.

Additional information

The name of the channel and additional infor-
mation about the current track is displayed, e.g.,
the name of the artist.
1. Select the desired channel.
2.
Press the button.
Changing channels using buttons
Press the button for the corresponding
direction. The next activated channel is
recalled.
Search function
1. Press and hold the button for the
corresponding direction. The activated
channels are shown, one after another, on
the display.
2. Release the button to select the displayed
channel.
Notes
When there is a signal blockage or the transmis-
sion is suspended momentarily for more than
4 seconds, a message appears on the Control
Display.
Online Edition for Part no. 01 40 2 609 312 - © 08/11 BMW AG
Press and hold the
BMW Professional radio
Service may be interrupted or unavailable
for specific reasons such as environmen-
tal or topographic conditions and others that
Satellite Radio cannot directly control. Signals
may not be available under tunnels, in parking
garages, next to tall buildings, nearby trees with
dense foliage, nearby mountains or other possi-
ble strong sources of radio interference. Ser-
vice should resume normally after the source of
signal unavailability has been

CD player and CD changer

Starting the CD player
It may take a moment for the CD player to start.
1. Switch on the radio, refer to page 142.
2. Insert the CD with the printed side up into
the CD slot.
If there is already a CD in the CD slot:
1. Switch on the radio, if necessary.
2. Press the button.
3.
Press the button.
Starting CD changer
It may take a moment for the CD changer to
start.
1. Switch on the radio, refer to page 142.
2. Fill the CD magazine and insert it, refer to
page 149.
3. Press the button.
4.
Press the button.
Selecting a CD
Press the button for the desired CD number.
The corresponding CD number will appear on
the display. At the end of the last track, the next
CD is selected and played.
Entertainment
cleared.<
147