Safety Instructions For Batteries - Silvercrest 275736 Operation And Safety Notes

Lectric salt & pepper mill
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 8
Please fill the salt and pepper mill only with
peppercorns or coarse salt.
FOOD SAFE! This product does
not affect the taste and aroma
properties of foodstuffs.
Safety Instructions
for Batteries
Remove the batteries from the device if they
are not going to be used for a prolonged
period.
CAUTION! DANGER OF EX-
PLOSION! The batteries must
never be recharged!
When inserting the batteries, ensure the correct
polarity! This is shown in the battery compart-
ments.
If necessary, clean the batteries and device
contacts before inserting the batteries.
Remove spent batteries immediately from the
device. There is an increased danger of leaks!
Batteries must not be disposed of in the normal
domestic waste!
Every consumer is legally obliged to dispose of
batteries in the proper manner!
Keep batteries away from children; do not
throw them in the fire, short-circuit them or take
them apart.
If the above instructions are not complied with,
the batteries may discharge themselves beyond
their end voltage. There is then a danger of
leaking. If the batteries have leaked inside your
device, you should remove them immediately in
order to prevent damage to the device!
Avoid contact with the skin, eyes and mucous
membranes. If you come into contact with cor-
rosive battery fluids, flush the affected area
thoroughly with clean water and contact a
doctor immediately.
Use
Insert Batteries / Filling of the
salt and pepper mill
Indication: The salt and pepper mill is intended
for peppercorns or coarse salt.
Proceed as follows:
 1. Hold the base with container
down and open the bottom cover
ning it anti-clockwise.
 2. Pull the battery compartment
with container.
 3. Insert 6 new batteries type AAA 1.5 V
Indication: Pay attention to the right polarity.
This is shown in the battery compartment.
 4. Put the battery compartment back and then
close the bottom cover
wise.
 5. Hold the base with container back to upright
position. Turn the top cover
and then lift up the cover.
 6. Fill up the base with container
corns or coarse salt. The best result will be
achieved when filling the base with container up
to 75 %.
 7. Close the top cover
until it secured.
Using of the salt
and pepper mill
T he device will be activated automatically
when it is positioned upside down (see fig. B).
A djusting the grinding level
T urn the adjustable grinding control
wise to receive a finer grinding level (see fig. A).
T urn the adjustable grinding control
clockwise to receive a coarser grinding level
(see fig. A).
firmly upside
2
by tur-
4
off the base
3
(LR03).
by turning it clock-
4
anti-clockwise
1
with pepper-
2
by turning it clockwise
1
clock-
5
anti-
5
GB/IE
9

Advertisement

Table of Contents
loading

Table of Contents