Table of Contents
Advertisement
Basic functions
First power connection
When connected to the power supply for the
first time, or after power has been switched
back on after a power failure, the display shows
the factory pre-set time for approximately 20
seconds:
Switching on and off
The factory pre-set language for the
display is English. To change the
language see "Settings menu".
Press the
button to turn the appliance on or
off. When the appliance is turned on, the
display shows the initial screen and emits a
sound:
Under the time indicator, there is the menu bar
on which the buttons associated with the
following functions can be found (see "Menu
bar functions"):
To turn off the appliance, press the
914779706/B
Controls lock
Independent timer
Pause function
Settings menu
button
until a sound is emitted. The current time is
displayed for approximately 20 seconds.
Pan recognition
The appliance is equipped with an automatic
pan detection system that recognizes the
position and the size of the pan. Pans are
indicated on the display by three circles that
have a predetermined size, regardless of the
shape of the pan.
Pans are detected automatically when
the appliance is switched on.
Positioning the pans
The glass ceramic surface is designed for up to
a maximum of 6 pans at the same time.
In order for the pans to be detected correctly
and for the heat to be transmitted efficiently, it is
best to use circular pans, the diameters of which
fall within the following limits:
Minimum recommended
diameter
Maximum recommended
diameter
Pans with diameters of between 100 and 145
mm are not detected in all positions.
Pans with a diameter greater than the maximum
recommended one, or which are non-circular,
are only detected after the appliance has been
145 mm
280 mm
USE - 35
Advertisement
Table of Contents
