Power Management Setup Page - IBM M768MR User Manual

M768MR Mainboard User's Manual

Power Management Setup Page

This page sets some of the parameters for the system power
management operation.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
©1998 American Megatrends, Inc. All Rights Reserved
Power Management/APM
Green Monitor Power State
Video Power Down Mode
Hard Disk Power Down Mode Suspend
Standby Time Out (Minute)
Suspend Time Out (Minute)
Display Activity
Serial port 1
Serial port 2
Parallel port
Floppy disk
Primary master IDE
Primary slave IDE
Secondary master IDE
Secondary slave IDE
RTC Alarm Power On
LAN Resume From Soft Off
RTC Alarm Power On
RTC Alarm Date
RTC Alarm Hour
Power Use this item to enable or disable the power
management routines. If you enable the power
Management/APM
management, you can use the items below to
set the power management operation.
Green Monitor This item defines which power-saving mode is
required to trigger the power management
Power State
operations of a green monitor.
Video Power Down
This item defines which power-saving mode is
required to power down the monitor.
Mode
Hard Disk Power This item defines which power-saving mode is
required to power down the hard disk drive.
Down Mode
Standby Time Out This sets the timeout for standby mode in
minutes. If the time selected passes without any
(Minute)
system activity, the computer will enter the
power-saving standby mode.
Suspend Time Out This sets the timeout for suspend mode in
minutes. If the time selected passes without any
(Minute)
system activity, the computer will enter the
power-saving suspend mode.
28
Disabled RTC Alarm Minute
Suspend RTC Alarm Second
Stand By
Disabled
Disabled
Ignore
Monitor
Monitor
Ignore
Monitor
Monitor
Ignore
Monitor
Ignore
Disabled ESC : Quit
Disabled F1 : Help
Disabled F5 : Old Values (Shift)F2
15 F6 : Load Optimal values
12 F7 : Load Best performance values
30
30
 : Select Item
PU/PD/+/- : Modify
: Color