IBM M768MR User Manual page 33

Display Activity
If you set this item to Monitor, any activity on
the display will reset the timers for the power-
saving timeouts.
Serial Port 1 If you set this item to Monitor, any activity on
the serial port 1 will reset the timers for the
power-saving timeouts.
Serial Port 2 If you set this item to Monitor, any activity on
the serial port 2 will reset the timers for the
power-saving timeouts.
Parallel port If you set this item to Monitor, any activity on
the parallel port will reset the timers for the
power-saving timeouts.
Primary master/
If you set these items to Monitor, any activity on
slave IDE devices on the primary IDE channel will reset
the timers for the power-saving timeouts.
Secondary master/
If you set these items to Monitor, any activity on
slave IDE devices on the primary IDE channel will reset
the timers for the power-saving timeouts.
Ring Resume If you enable this item, incoming calls to the fax/
From Soft Off modem can resume the system from a power-
saving mode or a software power down.
LAN Resume From If you enable this item, network traffic to the
LAN adapter can resume the system from a
Soft Off
power-saving mode or a software power down.
RTC Alarm Power If you enable this item you can set an alarm on
the system realtime clock that will resume the
On
system from a power-saving mode or a
software power down.
RTC Alarm Date /
If you have enabled the RTC Alarm Power on,
use these items to set the time and date of the
Hour / Minute /
alarm.
Second
3: BIOS Setup Utility
29