Brake System Indicator - Acura 2009 RL Owner's Manual

Main Menu Table Of Contents

Brake System Indicator

U.S. Canada The brake system
indicator normally
comes on when
you turn the ignition switch to the
ON (II) position and as a reminder to
check the parking brake. If you do
not release the parking brake, the
indicator will stay on, and you will
see a ''RELEASE PARKING
BRAKE'' message on the multi-
information display.
If the brake system indicator comes
on while driving, the brake fluid level
is probably low. You will see a
''BRAKE FLUID LOW'' message on
the multi-information display. Press
lightly on the brake pedal to see if it
feels normal. If it does, check the
brake fluid level the next time you
stop at a service station (see page
466 ).
508
If the fluid level is low, take your
vehicle to a dealer, and have the
brake system inspected for leaks or
worn brake pads.
However, if the brake pedal does not
feel normal, you should take
immediate action. A problem in one
part of the system's dual circuit
design will still give you braking at
two wheels. You will feel the brake
pedal go down much farther before
the vehicle begins to slow down, and
you will have to press harder on the
pedal.
You will also see a ''CHECK BRAKE
SYSTEM'' message on the multi-
information display.
2009 RL
Slow down by shifting to a lower
gear, and pull to the side of the road
when it is safe. Because of the long
distance needed to stop, it is
hazardous to drive the vehicle. You
should have it towed and repaired as
soon as possible (see Emergency
Towing on page 519 ).