Acura 2009 RL Owner's Manual page 478

Main Menu Table Of Contents
Install the new bulb in the socket
8.
by pushing it straight in the socket
until it bottoms.
9. Reinstall the socket into the light
assembly. Turn it clockwise to
lock it in place.
10. Test the lights to make sure the
new bulb is working.
11. When reinstalling the taillight
assembly, align and pop the snap
fasteners in place. Tighten the two
mounting bolts and reinstall the
trim in place.
12. Tighten the mounting nut securely,
and reinstall the maintenance lid.
Replacing a Back-up Light Bulb
COVERS
1. Open the trunk.
2. Remove the light assembly cover
by pulling its outside edge.
2009 RL
BULB
SOCKET
3. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Lights
CONTINUED
475