Cleaning Carpets; Cleaning Landing Gear - Piper PA-32R-301 SARATOGA SP Maintenance Manual

SERVICING (cont.)

(5) Cleaning Carpets.

Use a small whisk broom or vacuum to remove dirt. For soiled spots, use a non-inflammable dry-
cleaning fluid.

(6) Cleaning Landing Gear

Before cleaning the landing gear, plastic cover or similar material over the wheel and brake
assembly.
(a) Place a pan under the gear to catch waste
(b) Spray or brush the bear area with solvent or a mixture of solvent and degreaser.
(c) Allow the solvent to remain on the gear for five to ten minutes. Rinse gear with additional
solvent and allow to dry.
(d) Remove cover from wheel and remove the catch pan.
(e) Lubricate gear per Lubrication Chart. (Refer to 12-20-00).
PIPER AIRCRAFT
PA-32R-301/301T
MAINTENANCE MANUAL
1F6
12-00-00
Page 12-3
Reissued: July 1, 1993