Table of Contents
Advertisement
•
Connect the mains cable to the AC~ Socket
of the unit and then into a mains socket
•
Connect the mains cable to the AC~
Socket of the subwoofer and then into a
mains socket.
*
Power cord quantity and plug type vary by
regions.
Pair up with the subwoofer
Automatic Pairing
Plug the Soundbar and the subwoofer into the
mains sockets and then press on the unit or
remote control to switch the unit to On mode.
The subwoofer and Soundbar will automatically
pair.
•
When the subwoofer is pairing with
the Soundbar, the Pair indicator on the
•
When the subwoofer is paired with
the Soundbar, the Pair indicator on the
subwoofer will light up steadily.
•
Do not press Pair on the rear of the
subwoofer, except for manual pairing.
Manual Pairing
If no audio from the wireless subwoofer can be
heard, manually pair up the subwoofer.
1
Unplug both units from the mains sockets
again, then plug them in again after 3 minutes.
2
Press and hold the PAIR button on the
rear of the subwoofer for a few seconds.
» The Pair indicator on the subwoofer
will rapidly blink.
3
Then press
on the unit or remote
control to switch the unit ON.
» The Pair indicator on the subwoofer
will become solid when successful.
4
If the Pair indicator still keeps blinking,
repeat step 1-3.
Tips
•
The subwoofer should be within 6 m of the Soundbar
in an open area (the closer the better).
•
Remove any objects between the subwoofer and the
Soundbar.
•
If the wireless connection fails again, check if there is a
an electronic device) around the location. Remove
above procedures.
•
If the main unit is not connected with the
subwoofer and it is in ON mode, the word "CHECK
SUBWOOFER" will show on the display and the Pair
Indicator on the subwoofer will blink slowly.
11
Advertisement
Table of Contents
