Table of Contents
Advertisement
Connect to power
•
Before connecting the AC power
cord, ensure you have completed all
other connections.
•
Risk of product damage! Ensure that
the power supply voltage corresponds
to the voltage printed on the back or
the underside of the unit.
1
Connect the mains cable to the AC~
socket of the unit and then into a
mains socket.
2
Connect the mains cable to the AC~
socket of the subwoofer and then
into a mains socket.
*
Power cord quantity and plug type
vary by regions.
Pair up with the subwoofer
Automatic pairing
Plug the soundbar and the subwoofer
into the mains sockets and then press on
the unit or remote control to switch the
unit to ON mode. The subwoofer and
soundbar will automatically pair.
AC~
» Determine the status based on
the wireless subwoofer indicator.
LED state
Status
Fast blink
Subwoofer in pairing mode
Constant on
Connected / Pairing successful
Slow blink
Connection / Pairing failed
Tips
•
Do not press Pair button on the rear of the
subwoofer, except for manual pairing.
Manual pairing
If no audio from the wireless subwoofer
can be heard, manually pair up the
subwoofer.
1
Unplug both the unit and the
subwoofer from the mains sockets
again, then plug them in again after 3
minutes.
2
Press and hold the Pair button on the
rear of the subwoofer for 5 seconds.
» The indicator on the subwoofer
will rapidly blink.
3
Then press
control to switch the unit ON.
» The indicator on the subwoofer
will become solid when
successful.
4
If the indicator still keeps blinking,
repeat step 1-3.
Tips
•
The subwoofer should be within 6 m of the
soundbar in an open area (the closer the
better).
•
Remove any objects between the subwoofer
and the soundbar.
•
If the wireless connection fails again, check if
there is a conflict or strong interference (e. g.
interference from an electronic device) around
the location. Remove these conflicts or strong
interferences and repeat the above procedures.
on the unit or remote
EN
15
Advertisement
Table of Contents
