Contents Important Use system settings menu Safety Adjust network settings Notice Set time/date Set system language Your Micro Music System Reset all the settings Introduction Check software update information What's in the box Upgrade the rmware (if available) Overview of the main unit Know the software version Overview of the remote control Adjust backlight settings...
Important Warning • Never remove the casing of this apparatus. • Never lubricate any part of this apparatus. • Never look into the laser beam inside this Safety apparatus. • Never place this apparatus on other Read and understand all instructions electrical equipment.
Directive 2014/53/EU. You can omitted. We have tried to make the nd the Declaration of Conformity on packaging easy to separate into three www.philips.com/support. materials: cardboard (box), polystyrene foam (bu er) and Care of the environment polyethylene (bags, protective foam sheet.) Your system consists of...
Do not insert any objects other than Congratulations on your purchase, and discs into the disc compartment. welcome to Philips! To fully bene t from • Do not insert warped or cracked discs the support that Philips o ers, register into the disc compartment.
Overview of the main unit SELECT knob PRESET • Store radio stations. • Turn clockwise or anticlockwise to • Display the preset station tune to radio stations. • Turn clockwise or anticlockwise to • Open or close the disc navigate through the menu list. compartment.
Overview of the remote control • Press to start, pause, resume play or con rm selection. • Skip to previous album. • Adjust time. SCAN • Auto store radio stations. VOL- • Decrease volume. • Select a preset sound e ect. INFO •...
Get started Caution Prepare the remote control • Use of controls or adjustments or performance Caution of procedures otherthan herein may result in hazardous radiation exposure or other unsafe Risk of product damage! When the remote • operation. control is not used for long periods, remove the batteries.
Repeat steps 3 to 4 to select whether to Perform initial setup synchronize time with radio stations. • When the unit is powered on for the rst time, the [Setup wizard] appears on the display panel. Follow the instructions below to con gure some basic settings. To listen to Internet radio, you need to •...
[Pin]: select this option if your wireless • Turn on router supports WPS and PIN setup method.The radio generates an 8-digit • Press code number that you can enter into the The radio switches to the last router selected source. •...
Listen to Internet radio [Station list]: tune to any available • The radio can play thousands of radio Internet radio stations. stations and podcasts from around the world through the Internet connection. • [System settings]: adjust system settings (the same menu option for all working modes.
Store Internet radio stations Show Internet radio information While listening to Internet radio, press and Note hold MENU repeatedly to scroll through • You can store a maximum of 40 preset the following information (if available): stations (shared between Internet radio and Podcasts) Artist and track name In Internet radio mode, tune to an Internet...
Note Listen to Spotify • If no button is pressed within 15 seconds, the menu exits. Station lists and submenus may change from time to time and vary by locations. Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how Listen to Podcasts The Spotify Software is subject to third party...
Listen to DAB+ radio Tune to DAB+ radio stations Store DAB+ radio stations The rst time you select DAB+ radio mode, or if the station list is empty, the radio performs a full Note scan automatically. • You can stone a maximum of 20 preset radio •...
Select a preset DAB+ radio station Use menu in DAB+ mode MENU to access In DAB+ mode, press In DAB+ mode, you have two ways to select a DAB+ menu. preset radio station. Option A: Turn SELECT knob to scroll through the menu options: PRESET.
[DRC] • [DRC high]: switch DRC on to a high level (the default option recommended for noisy environment). • [DRC low]: switch DRC on to a low level. • [DRC o ]: switch DRC o . [Station order] • [Alphanumeric]: arrange the stations in alphabetical order (default setting).
Listen to FM radio Tune to FM radio stations • To remove a pre-stored station, store another station in its place. Press Source and turn SELECT knob to select [FM radio] mode. Press and hold for two seconds. Select a preset FM radio station The radio tunes to an FM radio station with strong reception automatically.
Use menu in FM mode Show RDS information RDS (fadio Data System) is a service that allows MENU to access In FM mode, press FM stations to show additional information. FM menu. If you listen to an FM station with RDS signal, Turn SELECT knob to scroll through the an RDS icon and the station name are menu options:...
Use system settings menu • [PBC Wlan setup]: select this option if your In working mode, press to access the wireless router supports WPS and PBC menu. setup method. Turn SELECT knob repeatedly to select • [View settings]: view the current network [System settings].
Note Note • If the radio detects that new software is available, it • If you are updating time from DAB+ or FM, the asks if you want to go ahead with an update. If you daylight savings option has no e ect. agree, the new software is downloaded and •...
Use main menu Turn SELECT knob to set the day, then In working mode, press to access the top press SELECT knob to con rm. menu. The month digit blinks. Turn SELECT knob repeatedly to select Repeat step 3 to set the month, year; and [Main menu].
Note • When the alarm is activated, an alarm icon for Alarm 1 or Alarm 2 is displayed. • To stop the alarm, press on the unit. • You can also go to [System settings]>[Time/ Date] to set time and date (see "Use system settings menu">"Set time/date").
• Make sure that the USB device contains playable SELECT knob. audio content. Prompt message "Please connect with • a device to: Philips TAM6805" appears Insert a USB device into the with Bluetooth icon ashing. socket • On your Bluetooth device, enable...
Product information Speci cations Ampli er General information 25 Wx2 RMS Rated Output Power AC Power(power adapter) Brand namePHILIPS Input: 100-240V~, Frequency Response 50-20000 Hz, ±3 dB 50/60Hz Signal to Noise Ratio (AC Input) > 65 dBA ≤30W Operation Power Speaker Driver 2x3"...
Check if your wireless router supports requesting service. If the problem remains WPS. Use the correct setup method unsolved, go to the Philips Web page (www. (PBC or PIN) to connect philips.com/support). When you contact Philips, yourWPS-supported router to the unit.
Page 26
Speci cations are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or...