Safety Information; Inspection - Turbo Air ADR042 Installation & Operation Manual

Safety Information

Be sure all power sources are turned off before checking the electric wiring or
appliances to avoid electric shock.
Do not run fan if cover or case is removed. This is to avoid electric shock.
All units are pressurized with dry air or nitrogen gas. All units must be evacuated
before charging the system with refrigerant. Keep finger away from moving parts.
Avoid touching refrigerant lines. Some parts are very hot and can cause burns.
Avoid contacting sharp edges or coil surface that are a potential injury hazard.
Avoid touching the units or electric box in wet hands to prevent electric shock.
Please call the specialized installation company or trained personnel when you installing,
moving, operating of the unit.
Field wiring must confirm to the requirements of units' electric specification.

Inspection

A person at the job site to receive material holds responsibility. Each shipment should
be carefully inspected against the bill of lading. The shipping receipt should not be
signed before careful inspection. Check carefully for concealed damage. Any shortage
or damages should be reported to the delivering carrier. Damaged material becomes the
delivering carrier's responsibility, and should not be returned to Turbo air unless prior
approval is given. Check the serial tag information with invoice. Report any
discrepancies to Turbo air sales representatives.
3