Default Startup Mode - SIGNALCORE SC5506A Operating & Programming Manual

Default Startup Mode

The factory power-up state for the device is detailed in Table 4. The default state can be changed to the
current state of either channel programmatically, allowing the user to power up the device in the last
saved state without having to reprogram.
Table 4. Factory default power-up state.
CH1
Frequency 2.0 GHz
Power 0.00 dBm
RF Output Enabled
ALC Mode Closed Loop
Standby Disabled
Auto Level Enabled
Ref Out
Ext Ref Lock
SC5506A Operating & Programming Manual
CH2
2.4 GHz
0.00 dBm
Enabled
Closed Loop
Disabled
Enabled
Disabled
Disabled
Rev 2.1.1 11