Indicator Leds - SIGNALCORE SC5506A Operating & Programming Manual

25 mhz to 6 ghz rf signal source usb, spi and rs-232 interfaces
Table of Contents

Advertisement

device to the saved user configuration. Otherwise, resetting the device will restore the factory
configuration. Refer to the table in the "Default Startup Mode" section of this manual for default settings.

Indicator LEDs

The SC5506A provides visual indication of important modes. There are three LED indicators on the unit.
Their behavior under different operating conditions is shown in Table 3.
Table 3. LED indicator states.
LED
STATUS
STATUS
STATUS
STATUS
ACTIVE
SC5506A Operating & Programming Manual
Color
Green
"Power good" and all oscillators phase-locked
Orange
Channel powered down
Red
One or more oscillators off lock
Off
Power fault
Device is open (green) /closed (off) , this indicator is also
Green/Off
user programmable (see register map)
Rev 2.1.1
Definition
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SC5506A and is the answer not in the manual?

This manual is also suitable for:

7100036-017100036-02

Table of Contents