Customizable Drawer; External Moisture Control; Led Lighting - Monogram ZIC303NP II Series Owner's Manual

FEATURES - ALL MODELS (Cont.)

CUSTOMIZABLE DRAWER

The customizable drawer can be used as a freezer, as a
fresh-food refrigerator or as a wine/beverage drawer.
To customize your drawer:
Press the ZONE indicator on the control pad to select the
customizable drawer.
Recommended Temperatures for
Customizable Drawer:
Button Function
Chill Fresh Food
Freezer Freezer
Wine Wine Storage
This drawer has LED strip lighting above it. There is also
one adjustable divider that can be placed in different
positions and a bin that can slide left or right in the drawer.

EXTERNAL MOISTURE CONTROL

This product is equipped with an external moisture control
feature. The refrigerator is shipped with the external
moisture control feature off.
LED DISPLAY LIGHTING
This unit has LED lighting on both sides of the interior
as well as above the freezer drawer and above the
customizable drawer.
Glass Door Models Only
The glass door models have a display light option for the
interior side lights: full power and 1/2 power.
In display mode at either full or 1/2 power, the lights will
stay on after the door is closed and automatically go off
after 1 hour.
To access the lighting options, press the ZONE indicator
on the control pad. In upper compartment mode, the
LIGHTS button is to the right on the control pad. When
lights are at full power, there are 2 bars under LIGHTS; at
1/2 power, there is 1 one bar; when the lights are off, there
49-1000500 Rev. 1
To change the divider position:
1. Pull in the tabs at the top of the divider to release it from
2. Lift the divider off of the raised tabs at the bottom
3. Move the divider to its new location and slide it onto the
4. Pull in the tabs at the top of the divider and position the
Temperature
37°F/3°C
0°F/–18°C
55°F/13°C
In some humid environments, moisture can form on the
front surface of the refrigerator cabinet. If moisture does
appear on the front surface of the refrigerator cabinet,
turn on the external moisture control feature by pressing
and holding the ALARM and LOCK buttons on the control
panel for 5 seconds. When activated, a small picture of a
water droplet with a line through it will appear below the (+)
and (–) signs on the control panel.
To turn off the external moisture control feature, press and
hold the ALARM and LOCK buttons on the control panel
for 5 seconds. The water droplet icon will disappear.
are no bars.
the tab holes at the front and back of the drawer.
of the drawer.
raised tabs.
divider so the tabs will fit into the tab holes. Release the
tabs so they lock into place.
Raised Tab
Lights at Full Power
Lights at 1/2 Power
Removable sliding bin
Tab
Tab Hole
Divider
Lights Off
9