Table of Contents
Advertisement
CONTENTS
Important Information ...................................................................................2, 3
Parts Required ............................................................................................................4
Caring for Your Stainless Steel ..........................................................................4
Tools, Hardware .......................................................................................................4
Staining Wood Drawer Fronts .........................................................................4
Install Water Line .....................................................................................................4
The Installation Space ............................................................................................5
Side-by-Side Installations ...................................................................................6
Product Clearances .................................................................................................6
The Installation Space ............................................................................................7
Side-by-Side Installations ...................................................................................7
Product Clearances .................................................................................................7
Step 1, Remove Packaging and Installation Parts ................................8
Step 2, Reversing the Door (ZIFI240 models only) .........................8-10
(ZIFI240 and ZIBI240 models only) .......................................................11, 12
Step 4, Leveling .......................................................................................................12
(ZIBI240 and ZIBS240 models only) ..........................................................12
Step 6, Connect Power .......................................................................................13
Step 7, Slide Product into Cutout ..................................................................13
Step 8, Set Temperature Controls ................................................................13
ZIFI240 AND ZIBI240 MODELS ONLY
PARTS REQUIRED
• Custom handle
• Assembled overlay panel
• Screws
INSTALL WATER LINE
• A cold water supply is required for automatic icemaker
operation. The water pressure must be between 20 and
120 p.s.i.
• The water line can enter the opening through the
floor or back wall. Route 1/4" O.D. copper tubing or
GE SmartConnect
kit between the cold water line and water
™
connection location, long enough to extend to the front of the
refrigerator.
• Install an optional water filter in the water line near the
refrigerator. A water filter is recommended in areas where
the water supply contains sand and particles. Installation
Instructions are packed with the filter.
NOTE: The only GE approved plastic tubing is supplied in
the GE SmartConnect
Refrigerator Tubing kits. Do not use
™
any other plastic water supply line because the line is under
pressure at all times. Other types of plastic may crack or
rupture with age and cause water damage to your home.
GE SmartConnect
Refrigerator Tubing Kits are available in the
™
following lengths:
2 (0.6 m)
WX08X10002
6 (1.8 m)
WX08X10006
Installation Instructions
PARTS SUPPLIED
• Handle side trim
• Optional black or
stainless steel toekick
(ZIBI240 AND ZIBS240 MODELS ONLY)
15 (4.6 m)
WX08X10015
25 (7.6 m)
WX08X10025
CARING FOR YOUR STAINLESS STEEL
• Before installation or first use, we strongly advise that
you polish the stainless steel exterior and handle with
a commercially available stainless steel cleaner such as
Stainless Steel Magic.
finish, we also strongly advise that you apply stainless
steel cleaner monthly.
TOOLS/HARDWARE REQUIRED
• Adjustable wrench
• Carpenter's glue (ZIFI240 and ZIBI240 models only)
• Screwdriver (ZIFI240 and ZIBI240 models only)
STAINING WOOD DRAWER FRONTS
The drawer fronts are unfinished cherry wood. During use,
oil from hands may accumulate and stain the wood.
• The drawer fronts may be stained and sealed to match
adjacent cabinetry.
• Apply the stain and sealer according to the manufacturer's
instructions. To avoid unpleasant odor, keep the door open
to ventil ate and allow the stain/sealer to dry completely
before using the product.
Water Line
Shut off the main water supply.
Turn on the nearest faucet long enough to clear the line of
water.
• Install a shut-off valve (required) between the icemaker water
valve and cold water pipe in a basement or cabinet. The shut-
off valve should be located where it will be easily accessible.
• Turn on the main water supply and flush debris. Run about
a quart of water through the tubing into a bucket. Shut off
water supply at the shut-off valve.
NOTE: Saddle type shut-off valves are included in many water
supply kits, but are not recommended for this application.
NOTE: Commonwealth of Massachusetts Plumbing Codes
248CMR shall be adhered to. Saddle valves are illegal and use
is not permitted in Massachusetts. Consult with your licensed
plumber.
4
To preserve and protect the fine
™
Water Line
9"
Shaded Area
max.
1/2"
10-1/2"
Floor
1-1/2"
min.
Advertisement
Table of Contents
