Sony MZ-RH910 Hi-MD Music Transfer Version 1 for Mac (User Manual) Operating Instructions Manual page 79

Message Meaning/Remedy
NO DIGITAL • You tried to make a copy from a disc that is protected by the Serial Copy
COPY
NO DISC • You tried to play or record with no disc in the recorder.
NO DISC • You tried to erase a setting in the Disc Memory on a disc that contains no
MEMORY
NO FILE • While viewing the file list, you selected a folder that have no folders or files
NO GROUP • You selected "Group Erase" with a disc without group setting.
• You tried to release a group setting with a disc that has no groups.
NO INPUT • The recorder could not detect digital input signals.
SIGNAL
NON GROUPED • You selected "Group Move" or "Group Erase", or you tried to label a group
TRACK
NOT ENOUGH • You tried to edit the contents of a 1GB Hi-MD disc with insufficient battery
POWER TO
EDIT
NOT ENOUGH • You tried to record on a 1GB Hi-MD disc with insufficient battery power
POWER TO
REC
NO TRACK • You tried to play a disc with no recorded tracks.
NO TRACK IS • You selected "Track Move" or "Track Erase", or you tried to label a track
SELECTED
P/B ONLY DISC • You tried to record or edit on a premastered disc (P/B stands for
PC – – MD • The recorder is connected to the computer.
PROTECTED • You tried to record or edit on a disc with the tab in the record-protect
DISC
PUSH STOP • You tried to open the lid by sliding the OPEN switch or operate the recorder
BUTTON
Management System. You cannot make copies from a digitally connected
source which was itself recorded using digital connection.
, Use analog connection instead (page 34).
, Insert a disc.
settings in the Disc Memory (page 57).
, You cannot erase groups with a disc with no groups.
, Insert a disc with group settings.
, Make sure that the source is connected firmly (page 21).
while selecting a track that does not belong to a group.
, Select a track within a group you want to edit, and then do the editing
operation again.
power for editing (page 73).
, Connect the AC power adaptor to the recorder or insert a fully charged
rechargeable battery or a new alkaline dry battery.
for recording (page 70).
, Connect the AC power adaptor to the recorder or insert a fully charged
rechargeable battery or a new alkaline dry battery.
, Insert a recorded disc.
without first selecting a track.
, Do the editing operation again after selecting the desired track first.
"playback").
, Insert a recordable disc.
position.
, Slide the tab back (page 66).
while the recorder was storing disc information with the dedicated USB
cable connecting the recorder to a computer.
, Operation must be done only after pressing x and "SYSTEM FILE
WRITING" has disappeared from the display.
79