Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. MZ-RH910 Serial No.
Declaration of Conformity Trade Name: SONY Model No.: MZ-RH910 Responsible Party: Sony Electronics Inc. Address: 16450 W. Bernardo Dr, San Diego, CA 92127 USA Telephone No.: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to...
• In no event will SONY be liable for any financial damage, or loss of profits, including claims made by third parties, arising out of the use of the software supplied with this recorder.
“ Memory Stick , Hi-MD, Net MD, “ ” ATRAC, ATRAC3, ATRAC3plus and their logos are trademarks of Sony Corporation. • Microsoft, Windows, Windows NT and Windows Media are trademarks or registered trademarks of Microsoft Corporation in the United States and /or other countries.
Table of contents About available functions and supplied manuals ... 10 Recorder Operation Looking at controls ... 14 Getting started ... 17 Recording a disc right away! ... 21 Playing a disc right away! ... 25 Using menus ... 27 How to use the menu items ...27 List of menus ...28 Various ways of recording ...
Editing recorded tracks ... 46 Before editing ...46 Adding titles (Title Input) ...46 Assigning tracks or groups as a new group (Group Set) ...49 Releasing a group setting (Group Release) ...50 Moving recorded tracks or groups (Move) ...50 Erasing tracks and the entire disc (Erase) ...52 Dividing a track (Divide) ...53 Combining tracks (Combine) ...54 Formatting the disc (Format) ...55...
Software Operation What you can do with SonicStage/MD Simple Burner ... 86 Installing ... 88 Providing the required system environment ...88 Installing the software onto your computer ...89 Using SonicStage ... 91 Importing audio data ...91 Transferring audio data from your computer to the MD Walkman ...93 Transferring back audio data from the MD Walkman to your computer ...95 Writing audio data to a CD-R/CD-RW disc ...98 Using SonicStage Help ...100...
This flyer explains the major features of Hi-MD Walkman and how it differs with standard MD Walkman. Using the recorder You can enjoy recording from a CD player or a microphone, then enjoy listening to the recordings that you made. Recorder Operation (pages 12 to 85) This section explains all of the recorder functions.
Using the recorder while it is connected to a computer The supplied SonicStage software allows you to transfer audio data between the recorder and the computer. The supplied MD Simple Burner software allows you to record audio data to the recorder. Audio CDs Internet Music files...
• CD-ROM (SonicStage/MD Simple Burner) (1)* Carrying pouch (1) * Do not play a CD-ROM on an audio CD player. Note When using this unit, remember to follow the precautions below in order to avoid warping the cabinet or causing the unit to malfunction.
How to use the supplied clamp filters When using the recorder connected to the computer, make sure to attach the clamp filters in the way described. (You must attach a clamp filter to comply with the applicable EMC standards.) It is unnecessary to attach the clamp filters if you use the unit without connecting it to the computer.
Looking at controls The recorder A MIC (PLUG IN POWER) jack B LINE IN (OPT) jack C HOLD switch Slide the switch in the direction of the arrow to disable the buttons on the recorder. To prevent the buttons from being accidentally operated when you carry the recorder, use this function.
The display window of the recorder A Operating condition indication display area Displays the indications of each operating condition. x: stop N: play X: pause m: fast rewind M: fast forward ., >: AMS B Selected operating condition display area Displays the recording mode, play mode, or selected menu item, etc.
The earphones with a remote control (except for the North American model) A VOL (volume) +, – control B HOLD switch Slide the switch in the direction of the arrow to disable the buttons on the remote control. To prevent the buttons from being accidentally operated when you carry the recorder, use this function.
Getting started Charge the rechargeable battery before using. Insert the rechargeable battery. Slide OPEN to open the battery compartment lid. Charging the rechargeable battery. Connect the AC power adaptor to DC IN 3V on the recorder and the AC power adaptor to a wall outlet.
• If the display disappears after a short time, the rechargeable battery is sufficiently charged. Using the alkaline dry battery for extended operation 1 Attach the dry battery case to the recorder. Rear of the recorder Make connections. For USA and Canadian models Connect the earphones to i.
Unlock the control. Slide HOLD to the opposite direction of the arrow (.) on the recorder or the remote control to unlock the controls. For USA and Canadian models HOLD For models supplied with the AC plug adaptor If the AC power adaptor does not fit the wall outlet, use the AC plug adaptor.
Measured in accordance with the JEITA (Japan Electronics and Information Technology Industries Association) standard. When using a 100% fully charged nickel metal hydride rechargeable battery When using a Sony LR6 (size AA) alkaline dry battery (produced in Japan) When playing continuously in Hi-MD mode Disc type...
Recording a disc right away! This section explains the basic procedure for making digital recordings using an optical cable connected to a CD player, Digital TV or other digital equipment. Make sure to use the optical cable. Note Recording cannot be done in MD mode when you record directly with this recorder without using a computer.
Insert a recordable disc. Slide OPEN to open the lid. Confirm the operation mode. This recorder has two operation modes, “Hi-MD mode” and “MD mode”. The operation mode is automatically recognized whenever the disc is inserted. After you insert a disc, check the operation mode on the display window of the recorder.
Record a disc. Select and pause the sound source to be recorded. Connected component While the recorder is stopped, press the jog dial (N/ENT) while pressing REC(+N)/T MARK. “REC” lights up and recording starts. Stop Pause Remove the disc A track mark is added at the point where you press the remainder of the track will be counted as a new track.
Notes • When you record on a 1GB Hi-MD disc, connect the AC power adaptor to the recorder, charge the rechargeable battery fully (battery level indication shows alkaline dry battery (battery level indication shows ). When you attempt to start recording on a 1GB Hi-MD disc, “NOT ENOUGH POWER TO REC”...
Playing a disc right away! Insert a recorded disc. Slide OPEN to open the lid. Play a disc. Press the jog dial (N/ENT) on the recorder. Press NX on the remote control. VOL +, – Jog dial (NENT) ., > To stop play, press x.
Stop Pause Select a track directly viewing track number or name Find the beginning of the current track or the previous track Find the beginning of the next track Go backwards or forward Cue to the next or previous group while playing a track in a group (Group skip) Start with the first track...
Using menus How to use the menu items The recorder has many menus with useful functions for recording, playback, editing, etc. To set the menu items, do the following procedure. If you are doing a menu operation for the first time after purchasing the recorder, “Menu Mode”...
List of menus The following table shows the menu items that you can select. Menu items can be set with the recorder only. Items listed under “Menu 1” are the selectable items which appear when you enter the menu, and items listed under “Menu 2” are the selectable items which appear when you select an item in Menu 1.
Menu 1 Menu 2 REC Settings REC Mode REC Level* MIC AGC* MIC Sens* Time Mark* Group REC* SYNC REC* File List — Option Menu Mode AVLS* Beep* Disc Memory* Quick Mode* Disc Mode Contrast* Jog Dial* Language Function Selects the recording mode (PCM, Hi- SP or Hi-LP).
Various ways of recording Before recording About the operation mode This recorder has two operation modes, “Hi-MD mode” and “MD mode”. The operation mode is automatically recognized whenever the disc is inserted. After you insert a disc, check the operation mode on the display window of the recorder.
Viewing various information You can check the remaining time, track number, etc. when recording or during stop. Enter the menu and select “Display”. Turn the jog dial to select the information you want, and then press the jog dial to enter the selection. Each turn selects the menu item as follows: While the recorder is stopped:...
All Remain Track number Elapsed time Disc name Remaining time after the current location on the disc and number of tracks after the current track The title that is displayed varies according to the selected Main play mode. While recording Lap Time Track number Elapsed time...
Turn the jog dial to select “Sens High” or “Sens Low”, and then press the jog dial to enter the selection. Sens High: When recording a soft sound or a sound with a normal volume. Sens Low: When recording with a loud or close-range sounds, such as those during an oral recording or a music concert.
Recording from a TV or radio (Analog Recording) This section explains how to record from equipment with analog output, such as a cassette recorder, radio, or TV. To LINE OUT jacks, etc. (white) (red) Line cable RK-G129, RK-G136, etc. To LINE IN (OPT) Make connections.
Recording Display Recording time mode Hi-LP Hi-LP • Approx. 10 hours and 10 min. on an 80-minute standard disc • Approx. 34 hours on a 1GB Hi-MD disc Audio components that support the linear PCM, Hi-SP and Hi-LP mode are indicated by the logo mark.
Adding track marks while recording You can add track marks (track number) while recording to divide the material into separate parts, that allow you to go to specific track quickly and easily. Jog dial Adding track marks manually While the recorder is recording, press REC(+N)/T MARK at the point you want to add a track mark.
Recording without creating a new group The recorder is factory set to automatically create a new group for each recording. To record without creating a new group, set the recorder as follows. While the recorder is stopped, enter the menu and select “REC Settings” - “Group REC”...
To start/stop recording in sync with the sound source (Synchro-recording) When making a digital recording (e.g., from a CD), this function automatically starts and stops the recorder in synchronization with the sound source. This eliminates the need for separate operation of the recorder and the sound source.
Various ways of playback Viewing various information You can check the track name, disc name, etc. during playback. Enter the menu and select “Display”. Turn the jog dial to select the information you want, and then press the jog dial to enter the selection. Each turn selects the display as follows.
Selecting the play mode You can listen to tracks in various play modes. The play mode can consist of a combination of Main play mode, Sub play mode and Repeat play. • Main play mode: selects the playback unit, such as tracks or groups Sub play mode: selects the type of play •...
Listening to tracks by a specific artist (Artist Play) (in Hi-MD mode only) If the track data includes the artist name, you can listen to tracks by a specific artist only. Do step 1 and select “Artist Play” in step 2 of “Playing tracks in Main play mode”...
Turn the jog dial to select a track, and then press the jog dial to enter the selection. To erase bookmarks While playing the track for which you want to erase the bookmark, press the jog dial for 2 seconds or more. Playing tracks in Sub play mode By specifying Sub play modes, you can...
To cancel Repeat Play Select “Off” in step 2. Searching for a track (Search) You can easily search for a track by track name, group name, artist name, or album name. Press SEARCH. Turn the jog dial to select the item you want to use for searching, and then press the jog dial to enter.
Notes • After step 4, Bookmark play is canceled. • After step 4, A-B Repeat play is canceled. • During a search, unlabeled tracks appear at the end of each list. • During a search, ungrouped tracks are placed together as “Group - -” and appear at the end of the list of groups.
To cancel the setting Select “Normal” in step 1. To modify and store the sound (For models except European models) You can modify the sound and store the results in “Custom 1” and “Custom 2”. Do steps 1 and select “Custom 1” or “Custom 2”...
Editing recorded tracks Before editing Notes • When you edit the contents of a 1GB Hi-MD disc, connect the AC power adaptor to the recorder, charge the rechargeable battery fully (battery level indication shows new alkaline dry battery (battery level indication shows ).
About the character palette During operations on the recorder, characters can be selected from the character palette in the display window. The character palette has the following configuration. Character palette Character palette for Hi-MD mode for MD mode Since only a part of the character palette is visible on the display, use the controls or buttons to move the cursor and enter characters.
Turn the jog dial downward. The cursor shifts from the letter input area to the character palette. The cursor and character alternate. Select a letter and press the jog dial to enter. The selected letter appears in the letter input area and the cursor moves to the next input position.
Assigning tracks or groups as a new group (Group Set) With this function, you can assign existing tracks or groups to a new group, and also you can assign a track that currently belongs to no group to an existing group. You can create a maximum of 255 groups on a disc used in Hi-MD mode and 99 groups on a disc used in MD mode.
Turn the jog dial to select the number of the desired last track, and then press the jog dial to enter. This selects the last track of the new group and the group can be labeled. If the disc contains groups, only the last track number of each group is displayed.
If the selected track is not in the group, the name of the currently selected track appears with “B” in the display. When the currently selected track is in a group If you are moving a track from inside a group to outside the group, or if there is no group on a disc, skip this step.
Erasing tracks and the entire disc (Erase) Note that once a recorded item has been erased, it cannot be recovered. Make sure to confirm the contents of the selected item before erasing it. When erasing tracks that have been transferred from the computer When you try to erase tracks that have been transferred from the computer,...
To erase the whole disc Play the disc you want to erase to check the contents. Press x. Enter the menu to select “Edit” - “Erase” - “All Tr Erase”. “ALL TRACKS WILL BE ERASED” appears in the display. Turn the jog dial to select “OK”, and then press the jog dial to erase the whole disc.
To add track marks while recording (except while synchro-recording) Press T MARK on the recorder at the point you want to add a track mark. You can use the “Time Mark” setting to add track marks automatically at specified intervals (except while digital recording) (page 36).
Formatting the disc (Format) When using a disc in Hi-MD mode, you can use the Format function to restore a disc to the condition it was in at the time of purchase. You can use this function only when using a disc in Hi-MD mode.
Other operations Changing the displayed menu items (Menu Mode) You can specify the display of all items in the menu (Advanced mode) or only basic items (Simple mode). Refer to “List of menus” (page 28) to check the menu items that cannot be displayed.
Storing the settings for individual discs (Disc Memory) The recorder is factory set to automatically store settings for each disc. The recorder automatically stores the settings for a disc and retrieves them whenever the disc is inserted. The following setting can be stored: Bookmark •...
Selecting the disc mode (Disc Mode) When you insert a 60/74/80-minute standard disc (blank) into the recorder, you can use this function to specify use of the disc in Hi-MD mode or MD mode. When recording on this recorder without using a computer, set “Disc Mode”...
Changing the operational direction of the display When you turn the jog dial downward, the display scrolls downward. This is the factory setting. You can change the factory setting to scroll in the opposite direction. Enter the menu and select “Option” - “Jog Dial”.
When a disc used in Hi-MD mode is inserted in the recorder, tracks recorded with a microphone or from a CD player to the recorder can also be migrated to your computer. • Record directly from a CD to an MD...
Connecting the recorder to your computer When you connect the dedicated USB cable directly to the USB connecting jack on the recorder, power (bus power) is supplied from the USB port of the computer. This allows the recorder to be used without power being supplied from the battery.
Notes • If you use the recorder connected to the computer, it is recommended that you insert a fully charged rechargeable battery as a precaution against power failures, disconnection of the dedicated USB cable or other unforeseen occurrences. We do not assure the results should there be a mis- operation, transfer failures, or destruction of audio data caused by unforeseen occurrences.
Viewing non-audio data stored on the disc in the display window of the recorder (File List) When using a disc in Hi-MD mode, you can view non-audio data stored on the disc in the display window of the recorder. The name and size of files are displayed.
The storage space for each disc (formatted with the recorder/the SonicStage software) Disc type Total size 60-minute 219 MB standard disc (229,965,824 bytes) 74-minute 270 MB standard disc (283,312,128 bytes) 80-minute 291 MB standard disc (305,856,512 bytes) 1GB Hi-MD disc 964 MB (1,011,613,696 bytes) This is space that is used for managing the files on the disc.
Additional information Precautions On safety Do not put any foreign objects in the DC IN 3V jack. On power sources • Use house current, nickel metal hydride rechargeable battery, or LR6 (size AA) battery. • For use in your house: Use the AC power adaptor supplied with this recorder.
Sony dealer. (If a trouble occurred when the disc was in the recorder, we recommend that the disc be left in the recorder when you consult your Sony dealer so that the cause of trouble may be better understood.)
2.8 mW + 2.8 mW (16 Ω) (European models) 5 mW + 5 mW (16 Ω) (Other models) Power requirements Sony AC Power Adaptor connected at the DC IN 3V jack: 120 V AC, 60 Hz (Models for USA, Canada, Mexico and Taiwan)
Optional accessories Optical Cable POC-15B, POC-15AB Line Cable RK-G129, RK-G136 Stereo Microphones ECM-MS907, ECM-MS957 MDR-series Stereo Headphones/earphones* SRS-series Active Speakers Recordable MDs MDW-series Recordable Hi-MD disc HMD1G Nickel metal hydride rechargeable battery NH-10WM Your dealer may not handle some of the above listed accessories.
Check to see if the problem is listed in, “Troubleshooting” (page 69). Check “Messages” (page 77) for the problem as well. If after step 1 you still cannot solve the problem, consult your nearest Sony dealer. While charging Symptom...
(pages 21 and 34). • There is no digital signal from the portable CD player. , When recording digitally from a portable CD player, use the AC power adaptor and disable the anti-skip function (such as ESP) on the CD player.
Symptom Cause/Remedy The lid does not open • The lid does not open until “SYSTEM FILE WRITING” disappears after recording. in the display. “TRACK FULL” • This is due to the MiniDisc system limitation. When 2,047 tracks (on appears even before the a disc used in Hi-MD mode) have been recorded on the disc, disc has reached the “TRACK FULL”...
Symptom Playback sound skips. Momentary noise is heard. Sound has a lot of static. • Strong magnetism from a television or such device is interfering The volume of the recorded track is low. Volume cannot be turned up. No sound comes through the earphones.
While editing Symptom Cause/Remedy “NOT ENOUGH • Editing is not possible when using a 1GB Hi-MD disc even when the POWER TO EDIT” battery level indication shows enough power remaining while the appears and editing recorder is stopped or playing. This is because of a mechanism that cannot be done on a disables editing when the remaining battery power is estimated by 1GB Hi-MD disc.
Symptom A new group cannot be created. While the recorder is connected to the computer Symptom The recorder is not recognized by the computer. Charging by USB bus power cannot be done ( flashes in the display). The rechargeable battery cannot be charged sufficiently through USB bus power.
Symptom Cause/Remedy The playing time of This is due to a calculation discrepancy between the recorder and the a transferred track is computer. different from the time that appears on your computer monitor. You cannot transfer • The minimum recordable time on a disc is normally 2 seconds in SP tracks that will fill mode, 4 seconds in LP2 mode, and 8 seconds in LP4 mode.
Symptom The recorder does not work or works poorly. File names or folder names displayed by the File list function are different from those saved on the computer. The file names or folder names are not correctly displayed by the File list function.
Messages If the following messages appear in the display window on the recorder, check the chart below. Message Meaning/Remedy AVLS NO • AVLS is set to “On” and so the volume cannot rise higher. , Set AVLS to “Off” (page 56). VOLUME OPERATION BLANKDISC...
• You selected bookmark play without setting bookmarks. , Set bookmarks (page 41). BOOKMARKED TRACK appears again, please consult your nearest Sony dealer. this level is not possible. SonicStage software. or 99 groups (on a disc used in MD mode) on a disc. Keep the group number within 255 or 99.
Message Meaning/Remedy NO DIGITAL • You tried to make a copy from a disc that is protected by the Serial Copy COPY Management System. You cannot make copies from a digitally connected source which was itself recorded using digital connection. , Use analog connection instead (page 34).
Message Meaning/Remedy READ ERROR • The recorder cannot read the disc information correctly. , Reinsert the disc. REC ERROR • Recording was not correctly done. , Place the recorder at a place with no vibrations and record again. • The disc is soiled with an oil film or finger prints, is scratched, or is not a standard disc.
Explanations About Hi-MD “Hi-MD” is a new MiniDisc format. Incorporating the new ATRAC3plus audio compression technology, Hi-MD is a new recording format that delivers longer recording times than ordinary MDs. Hi-MD discs can also be used as a computer storage medium for non-audio data such as text and images. This recorder supports Hi-MD only. For more details on Hi-MD, refer to the supplied flyer “What you can do with the Hi-MD Walkman”.
About “System File” The system file is space on the disc that is used to store information other than audio files; for instance, track numbers. If the MiniDisc were a book, the system file would correspond with the index or table of contents. The recorder rewrites the system file whenever an operation such as recording, adding or deleting track marks, or moving tracks has been done.
When using a disc in MD mode You cannot record in MD mode on this recorder. When transferring from the computer Codec/Bit rate ATRAC(stereo)/292kbps ATRAC3/132, 105kbps ATRAC3/66kbps Approximate time When transferring 4-minute tracks About recordable audio formats The audio formats that can be recorded on this recorder vary according to the disc type and recording method.
About the DSP TYPE-S for ATRAC/ATRAC3 This recorder supports DSP TYPE-S, a specification for high-level Sony MiniDisc decks equipped with digital signal processors (DSP). This specification allows the recorder to produce high-quality sound from tracks recorded in MDLP mode.
The input jack of this recorder works as both digital and analog input jacks. Connect the recorder to a CD player or a cassette recorder using either digital (optical) input or analog (line) input. To record, see “Recording a disc right away!” (page 21) to record using digital (optical) input, and “Recording from a TV or radio (Analog Recording)”...
What you can do with SonicStage/ MD Simple Burner What you can do with SonicStage SonicStage allows you to import audio data to your computer from music sources such as audio CDs and the Internet, and then transfer the audio data stored in your computer to an Audio CD Music files in the Internet...
Basic operational flow using an MD Walkman SonicStage Providing the required system environment (page 88) Installing the software onto your computer (page 89) Importing audio data to your computer (page 91) Connecting an MD walkman to your computer (see page 61 on “Recorder Operation”) Transferring audio data from your computer...
Installing Providing the required system environment System requirements The following system environment is required in order to use the SonicStage Ver. 3.0/MD Simple Burner Ver. 2.0 software for the MD Walkman. Computer IBM PC/AT or Compatible • CPU: Pentium III 450 MHz or higher •...
Installing the software onto your computer Before installing the software • Make sure to close any virus-check software, as such software usually demands a large amount of system resources. • When you use the MD Walkman, make sure to install the software with the supplied CD- ROM.
Click [Install SonicStage and MD Simple Burner] and then follow the displayed instructions. Read the instructions carefully. Depending on your region, the buttons other than [Install SonicStage and MD Simple Burner] may differ from those in the illustration above. The installation may take 20 to 30 minutes, depending on your system environment. Make sure to restart your computer only after the installation is completed.
Using SonicStage Importing audio data This section explains how to record and store audio data from an audio CD to My Library of SonicStage on the hard disk drive of your computer. You can also assign cover art for imported albums. You can record or import music from other sources such as the Internet and your computer’s hard disk.
Point to [ Music Source] on the upper-left side of the screen and click [Import a CD]. The screen switches to the “Music Source” (Importing CD) screen and all the tracks on the audio CD are listed. If necessary, click If you unchecked a box by mistake, click it again to restore the check.
Transferring audio data from your computer to the MD Walkman Audio data stored in My Library of SonicStage can be transferred to your MD Walkman an infinite number of times. The My Library list [Settings] Insert a disc into the MD Walkman and connect the MD Walkman to your computer.
If necessary, change the transfer mode. As the default setting, tracks in the OpenMG (PCM/ATRAC3/ATRAC3plus) format will be transferred in the same format and bit rate (normal transfer). If the device connected to the computer does not support the above format, the format and bit rate will be converted to those of the device.
Transferring back audio data from the MD Walkman to your computer The My Library list Transferring from the MD Walkman back to your computer Audio data that has been transferred from your computer and stored on the MD can be transferred back to My Library of SonicStage on your computer.
Click in the middle of the screen. The transferring of the tracks selected in step 3 starts. To stop transferring Click To import cover art set using a camera-equipped Hi-MD Walkman to My Library If you are using a camera-equipped Hi-MD Walkman in Hi-MD mode, you can modify the cover art for any group transferred from My Library, as well as register the covet art for another group.
Click in the middle of the screen. The “Import” dialog box appears. Click [Yes]. The importing of the tracks selected in step 3 starts. To stop importing Click When tracks recorded in analog are included on a Hi-MD, a dialog box appears confirming whether to save those tracks in WAV format.
Writing audio data to a CD-R/CD-RW disc You can write tracks in My Library of SonicStage to a CD-R/CD-RW disc. Analog tracks recorded on a Hi-MD device and imported to My Library can be written to and enjoyed on a CD-R/CD-RW. The number of times data can be written may be limited due to copyright restrictions.
Click in the middle of the screen. The selected albums or tracks appear on the right side of the screen (the CD-R/CD- RW) as a tentative list of items to be written. Click in the right of the screen. The “Writing Settings” dialog box appears allowing you to set options for writing. Click [OK].
Using SonicStage Help SonicStage Help provides further details on how to use SonicStage. SonicStage Help allows you to search easily for information from a list of operations, such as “Importing Tracks” or “Transferring Tracks”, or from large list of keywords, or by typing in words that might lead you to the appropriate explanations.
Understanding SonicStage Help The left side frame 1 Double click [Overview] in the left-side frame. 2 Click [About This Help File]. The explanation will appear in the right-side frame. 3 Read the text. Scroll the display if necessary. Click underlined words to jump to their explanations. Searching for a word inside an explanation [Search] “Type in the keyword...
Referring to SonicStage Help Click [Contents] on the left side of the Help window to view a list of items for each operation. Click on any items for details. Importing audio data to the computer Import audio data from the Internet Import audio files on the computer in SonicStage...
Backing up audio data We recommend that you back up your music data as a precaution against hard disk crashes or computer replacement. Back up audio data in My Library Look up about SonicStage backup Troubleshooting Look up troubleshooting procedure When you want to know Look up unknown words Look up the kinds of audio data...
Using MD Simple Burner Before using MD Simple Burner MD Simple Burner allows you to record music tracks from an audio CD in the CD drive of your computer to the MD Walkman. There are two ways to record from an audio CD. •...
Recording using MD Walkman operations (Simple mode) Insert a recordable disc into the MD Walkman and then connect the MD Walkman to the computer. For details about connections, see page 61 on “Recorder Operation” section. Do not disconnect the power source or the dedicated USB cable before the transfer has completed.
Recording by computer operations (Standard mode) To start MD Simple Burner, click [Start] Simple Burner]. ∗ [Programs] in the case of Windows 2000 Professional/Windows Millennium Edition/Windows 98 Second Edition There are other ways to start up MD Simple Burner as follows: •...
The window for recording selected tracks from an audio CD Track information (CD) Total time of the Artist name selected tracks of CD Album Title [Get CD Info] Information of an audio CD (album name, track title, etc.) will be reflected in the track list.
Other information Uninstalling SonicStage/MD Simple Burner To uninstall SonicStage/MD Simple Burner, follow the procedures below. Click [Start]–[Control Panel]*. ∗ [Settings]–[Control Panel] in the case of Windows 2000 Professional/Windows Millennium Edition/Windows 98 Second Edition Double-click [Add/Remove Programs]. Click [SonicStage 3.0.xx] or [MD Simple Burner 2.0.xx] in the “Currently Installed Programs”...
On copyright protection The OpenMG technology allows you to enjoy digital music, while maintaining the copyrights of its holders. Restrictions on audio content High-quality digital audio content is widely available through music distribution services on the Internet. To protect the copyrights of its holders from unauthorized distribution, some audio content is distributed with certain restrictions on recording and playback.
1 Check the symptoms in this “Troubleshooting” section. 2 Check the symptoms in SonicStage Help when you use SonicStage. 3 If the problem cannot be solved after checking the above references, check the following table and then consult your nearest Sony dealer. Computer • Manufacturer: •...
The software cannot be installed onto your computer Problem The installation was not successful. The installation appears to have stopped before it has completed. The progress bar on the display is not moving. The access lamp has not lit for a few minutes. Cause/Remedy You are using an OS that does not support this software.
Using a MD Walkman connected to the computer Problem Your computer does not recognize the MD Walkman. Even though the dedicated USB cable is used to connect the MD Walkman to the computer, the display on the MD Walkman does not indicate it is connected.
Index A-B Repeat Accessories optional supplied ATRAC3plus AVLS Battery Battery life BEEP Bookmark CD drive CDDB CD-R/RW drive CD-ROM Character palette Charging Clamp filter Cleaning Combining tracks Computer Connecting analog computer digital when charging Contrast Copyright protection Data storage Disc memory Disc Mode Display Display language...
Recording analog digital from microphone level recording mode Synchro-recording time Recording mode Recording mode (Bit rate) Simple mode SonicStage SonicStage Help Start (software) MD Simple Burner SonicStage Storage space System environment System limitations Title Track mark erase Track search Transferring to the MD Walkman to your computer Uninstalling...