Sony MZ-RH910 Hi-MD Music Transfer Version 1 for Mac (User Manual) Operating Instructions Manual page 75

Portable minidisc recorder/player walkman
Hide thumbs Also See for MZ-RH910 Hi-MD Music Transfer Version 1 for Mac (User Manual):
Table of Contents

Advertisement

Symptom
The playing time of
a transferred track is
different from the
time that appears on
your computer
monitor.
You cannot transfer
tracks that will fill
up the remaining
recording time on
the disc.
The disc size
displayed on the
computer is not the
same as the disc size
printed on the disc.
You cannot operate
the recorder.
The lid does not
open.
Others
Symptom
"Advanced" or
"Simple" is
displayed.
Some menu items
cannot be displayed.
The recorder does
not work or works
poorly.
Cause/Remedy
This is due to a calculation discrepancy between the recorder and the
computer.
• The minimum recordable time on a disc is normally 2 seconds in SP
mode, 4 seconds in LP2 mode, and 8 seconds in LP4 mode. When you
transfer a track from your computer, the recorder needs a 2-second (or
4- or 8-second) space for a track even if the track is under 2 seconds (or
4 or 8 seconds) in length. Also, the recorder inserts a 2-second (or 4 -or
8-second) space in between tracks during transfer operation. For this
reason, the recorder needs an additional 6 seconds (or 12 or 24 seconds)
for each track. This reduces the maximum recording time for each track
by 6 seconds (or 12 or 24 seconds) during transfer operation (in MD
mode only).
• The difference is due to the use of the binary system to indicate the disc
size on the computer and the decimal system to express the disc size on
the disc and other recording media. For details on the disc size, see
page 64.
• You cannot operate the recorder while the recorder is connected to the
computer.
• It happens if you disconnect the dedicated USB cable in the middle of a
data transfer, recording, or editing operation on the computer, but while
the rechargeable battery is missing from the recorder or is drained.
, Reconnect the dedicated USB cable or insert a fully charged
rechargeable battery into the recorder, and then press x.
Cause/Remedy
• You attempted to do a menu operation for the first time after purchase
of the recorder (by pressing the MENU button for 2 seconds or more).
, Select the Menu mode (page 56).
• "Menu Mode" is set to "Simple".
, Set the "Menu Mode" to "Advanced" to display all the menu items.
• The rechargeable battery is not charged.
, Charge the rechargeable battery.
• The volume is low.
, Turn up the volume.
• No disc is inserted.
, Insert a recorded disc.
• The HOLD function is turned on ("HOLD" appears in the display when
you press an operation button on the recorder).
, On the recorder, disable HOLD by sliding the HOLD switch to the
opposite direction of the arrow
(pages 14, 18)
.
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents