Dividing A Track (Divide) - Sony MZ-RH910 Hi-MD Music Transfer Version 1 for Mac (User Manual) Operating Instructions Manual

To erase the whole disc
1
Play the disc you want to erase to
check the contents.
2
Press x.
3
Enter the menu to select "Edit" -
"Erase" - "All Tr Erase".
"ALL TRACKS WILL BE
ERASED" appears in the display.
4
Turn the jog dial to select "OK", and
then press the jog dial to erase the
whole disc.
"SYSTEM FILE WRITING" appears
in the display, and all the tracks will
be erased.
When erasing completes, "NO
TRACK" appears in the display in
Hi-MD mode and "BLANKDISC"
appears in MD mode.

Dividing a track (Divide)

You can divide a track with a track mark,
creating a new track from the part
following the track mark. The track
numbers will increase as follows.
1 2
Track marking
1 2 3
Track numbers increase.
Note
You cannot divide a track if:
•
the track has been transferred from a
computer.
•
the track has been recorded in Hi-MD mode
using the MD Simple Burner software.
•
the dividing point is at the beginning or end of
the track.
•
the division would cause the total number of
tracks on the disc to exceed the maximum
allowed (2,047 tracks for a disc used in Hi-
MD mode or 254 tracks for a disc used in MD
mode).
Dividing a track directly
While playing or pausing, press T MARK
at the point you want to mark.
3 4
4 5
T MARK
53