Table of Contents
Advertisement
4.
Reprocessing Procedure
The probe must be reprocessed after each use. Refer to the
reprocessing instruction in this chapter. For reprocessing of
Coupler attachment EZU-PA3C1, PA3C1H and PA3C2, refer to the
instruction manual of each Coupler attachment.
WARNINGS
Limitations on
reprocessing
Transportation
before using
‐
The probe is delivered unsterile. Prior to the first
use, reprocess the probe.
‐
Temperature should not exceed 60°C during
reprocessing.
‐
Probe connector is not water resistant.
The probe is not completely submersible. The immersible
part is shown in Fig.1. The un-immersible part should
be disinfected by wipe disinfection.
The probe should be packed in a sterile pouch or
container to transport from Central Sterile Supply
Department (CSSD) to an operating room. Be careful not
to damage the sterile pouch or container during
transportation.
-8-
Q1E-EP1361
Advertisement
Table of Contents
