Assigning Tracks Or Groups As A New Group (Group Set) - Sony MZ-NH900 Operating Instructions Manual

1)
Functions
To insert a blank
space.
To delete a letter.
To cancel labeling.
To move the cursor
from the letter input
area to the character
palette.
To move the cursor
from the character
palette to the letter
input area.
To display
"_ (space)", ":", "/",
or "–" at the input
position in the letter
input area.
To switch between
capital letters and
.
small letters
1)
Functions of the buttons or the control may
differ depending on when the cursor is in the
letter input area or in the character palette.
5
Repeat step 4, and then enter all
characters of the label name.
6
Press NENT for 2 seconds or more
Re-labeling
You can change the label of the disc, a
group or a track by doing the procedure
for "Labeling" (page 61).
62
Operations
Press GROUP and
press the 5-way
control key towards
> at the same
time.
Press GROUP and
press the control key
towards . at the
same time.
Press x for 2 seconds
or more.
Press the 5-way
control key towards
VOL –.
Press x.
Press X.
Press X.
Assigning tracks or
groups as a new group
(Group Set)
With this function, you can assign
existing tracks or groups to a new group,
and also you can assign a track that
currently belongs to no group to an
existing group.
You can create a maximum of 255 groups
on a Hi-MD disc or a standard disc in Hi-
MD mode and 99 groups on a standard
disc.
Disc
Track number
1 2 3
Disc
Group 1
1 2 3
Registration of non-consecutive tracks is
.
not possible (for example, track 3 and
tracks 7 and 8 cannot be assigned to a new
group).
It is not possible to make a new group if
the first track or last track of the group has
been selected from the middle of an
existing group.
Track numbers appear according to their
order on the disc, not their order within
the group.
Group 1
4 5 6 7 8 9 101112
Assigning tracks 1 to 3 to a new
group
Assigning group 1 and group 2 to a
new group
Group 2
4 5 6 7 8 9 101112
Group 2