Sony MZ-NH900 Operating Instructions Manual page 14

L OPEN switch
M Display window
N T MARK button
O
USB cable connecting jack
P LINE IN (OPT) jack
Q MIC (PLUG IN POWER) jack
There is a tactile dot beside the MIC
(PLUG IN POWER) jack.
The display window of the recorder
A Character information display
Displays the disc and track names,
date, error messages, track numbers,
etc.
B SYNC (synchro-recording) indication
C Hi-MD/MD indication
"Hi-MD" lights up when the
operation mode of the recorder is in
Hi-MD mode and "MD" lights up
when the operation mode is in MD
mode.
D REC indication
Lights up during recording or file
transfers from the computer. When
flashing, the recorder is in record
standby mode.
14
R HOLD switch
S i (headphones/earphones)/LINE
1 2
7
E Battery indication
F Disc indication
G Track mode (PCM, Hi-SP, Hi-LP, SP,
H Sub play mode/Repeat play
I Main play mode indications
Slide the switch in the direction of the
arrow to disable the buttons on the
recorder. To prevent the buttons from
being accidentally operated when you
carry the recorder, use this function.
OUT jack
3 4 5
8
Shows the approximate remaining
battery power. If the batteries are
weak, the indication becomes empty
and starts flashing.
Shows that the disc is rotating for
recording or playing.
LP2, LP4, MONO) indication
indications
Shows the selected Sub play mode
(single-track play, shuffle play, etc.) or
Repeat play.
Shows the selected main play mode
(group play, program play, etc.).
6
9