FIAM. RAY PLUS 1712/X Product Information page 8

2
Safety instructions
• Intended Use
Once removed from its original packaging, the RAY PLUS Table must be placed on a perfectly flat surface.
All the RAY PLUS Table's supporting bases must be resting firmly on the surfaces on which it is placed; otherwise, the RAY PLUS
Table may lose stability, making it hazardously unstable.
ATTENTION: by rotating the extensions be sure that the handle is properly set in its place under the mechanism itself.
Weights, objects and loads must be evenly distributed across the surfaces of the RAY PLUS Table and well balanced in order to
ensure stability and safety. Unevenly placed or unbalanced weights, objects and loads on the surfaces of the RAY PLUS Table may
reduce its stability and thus its safety.
Sharp items or anything which may damage the glass (such as chemical products containing hydrofluoric acid) should not be
placed on the surface of the RAY PLUS Table. If objects of this kind are placed on the surface of the RAY PLUS Table in spite of
this warning, you are urged to take adequate precautions to prevent damage to the float glass.
When placing sharp objects on the surface of the RAY PLUS Table, a mat of insulating material (such as rubber, cork, plastic or
leather) thick enough to dampen any impacts should be placed between the float glass surface and the sharp objects. Never place
items which may damage the float glass (such as chemical products containing hydrofluoric acid) on the surface.
• Warnings - Incorrect use and Non-recommended use
Below, we provide a series of warnings and examples of incorrect uses or procedures which reduce the safety of the RAY PLUS
Table.
The series of warnings and incorrect uses or procedures provided below is purely guideline and does not cover all the possible
circumstances for incorrect or non-recommended uses of the RAY PLUS Table, which must be evaluated on each occasion.
Do not sit or stand upon the float glass surface of the RAY PLUS Table.
Do not use the float glass surface of the RAY PLUS Table as a chopping surface.
Do not strike the RAY PLUS Table with hammers or pointed items which may crack or shatter the glass.
Do not use powder detergents or detergents containing abrasives for cleaning the RAY PLUS Table, since they may damage the
float glass.
Do not use the RAY PLUS Table for DIY work or for mechanical, electrical or electronic repairs.
In normal conditions of use, do not tilt the product by more than 10°. Any higher angles might reduce the stability of the RAY PLUS
Table.
Never place items at temperatures below -30°C (such as items just taken out of the freezer), or with temperatures above +30°C
(such as foods just removed from the oven) on the RAY PLUS Table; exposing the surface to stresses of this kind may damage
the glass, reducing its strength and thus its safety level.
Never expose the RAY PLUS Table to intense heat sources (such as stoves or ovens); exposing the table to stresses of this kind
may damage the float glass, reducing its strength and thus its safety level. Do not expose the RAY PLUS Table to temperatures
below -10°C or weather; exposure of this kind may damage the glass, reducing its strength and thus its safety level. The
RAY PLUS Table should be placed well away from items such as coat racks or ornaments which may accidentally fall onto its
surface.
• Moving the Table
To ensure that the RAY PLUS Table is moved in the conditions of the utmost safety, we urge you to comply with the instructions
provided below:
The Table must always be handled by at least four people, wearing gloves which assure a good grip on the float glass.