3.
Basic Setup
3.1 Power-On Initialization
As shown in the diagram below, after you plug in the power cord, the tally
light in the front will start flashing red and will be OFF as soon as the power-
on initialization is complete. The camera head should be at the HOME position
with the lens facing front. After that, the camera lens will turn to the position
which the camera is turned off for the last time.
3.2
Video Output
You are allowed to view the camera video via NDI® | HX & DVIP, 4K HDMI
OUT and 3G-SDI OUT.
NDI® | HX & DVIP Port
Connect the DC 12 V power
adapter
15