Logical Node Ggio (Generic Process I/O) Configuration - ABB RELION REB500 Communication Protocol Manual

Distributed busbar protection

Hide thumbs Also See for RELION REB500:

Table of Contents

1MRK 511 450-UEN Rev. C

IEC18000608 V1 EN-US

Figure 6:

Diagnostic and system events are always available for transfer whichever protocol is in use

and cannot be configured.

The IEC 60870-5-103 section only appears when the protocol is configured.

3.3.2

Logical node GGIO (Generic process I/O) configuration

Signals, which are not mapped to the IEC 61850 Model by the HMI500 tool automatically, can

only be transferred to SCS/SMS indirectly. They have to be assigned to binary I/Os first.

The binary I/Os are represented by the logical node GGIO in the 61850 model. By default, no

signals are mapped to the GGIO logical node.

The mapping configuration is opened by selecting the CR channel and pressing button CR

event config, OC channel and OC event config for binary inputs, respectively.

Distributed busbar protection REB500

Communication protocol manual IEC 61850

Configuring signals as events

Section 3

Interbay bus functions

13000024-IEC18000608-1-en.vsdx

GUID-49BCE444-5FF8-4226-800B-E1399532950B v3

Table of Contents