ABB RELION REB500 Communication Protocol Manual page 18

Section 3
Interbay bus functions
IEC18000609 V1 EN-US
Figure 7:
Leading and lagging edges shall be ticked. The IBB which is configured for IEC 61850-8-1 shall
be ticked.
The User defined text can be changed to identify the signal in the 61850 client tool.
IEC18000610 V1 EN-US
Figure 8:
Table 4:
Setting
at the leading edge
at the leading edge
Table continues on next page
12
Configuring I/Os as GGIO
Configuring GGIO description
Configuration Ethernet communication
Description
recorded on the positive going edge
recorded on the negative going edge
© 2019 - 2020 Hitachi Power Grids. All rights reserved
1MRK 511 450-UEN Rev. C
15000025-IEC18000609-1-en.vsdx
15000026-IEC18000610-1-en.vsdx
Default setting
No recording
No
No
Distributed busbar protection REB500
Communication protocol manual IEC 61850