Headers - Nvidia GeForce7150 / nForce630i User Manual

3-2 Headers

(1) Line-Out/MIC Header for Front Panel (9-pin): AUDIO1
This header connects to Front Panel Line-out, MIC connector with cable. Without install
the cable, this header default setting is 5-6 short, 9-10 short. When you install the cable
you have take off these jumpers.
(2) Speaker connector: SPEAK1
This 4-pin connector connects to the case-mounted speaker. See the figure below.
(3) Power LED: PWR LED1
The Power LED is light on while the system power is on. Connect the Power LED
from the system case to this pin.
(4) IDE Activity LED: HD LED
This connector connects to the hard disk activity
indicator light on the case.
(5) Reset switch lead: RESET
This 2-pin connector connects to the case-mounted
reset switch for rebooting your computer without
having to turn off your power switch. This is a
preferred method of rebooting in order to prolong the
lift of the system's power supply. See the figure
below.
(6) Power switch: PWR BTN
This 2-pin connector connects to the case-mounted
power switch to power ON/OFF the system.
(7)USB Port Headers (9-pin) :
USB2/USB3 / USB4 (Optional)
These headers are used for connecting
the additional USB port plug.
attaching an option USB cable, your can
be provided with two additional USB
plugs affixed to the back panel.
(8) FAN Power Headers: SYSFAN1, SYSFAN2 (3-pin), CPUFAN1 (4-pin)
AUDIO
2 10
Pin 1
9
Line-Out, MIC Headers
USB2
By
Pin 1
10
PWRLED
Pin 1
JW FP
SPEAK
Pin 1 Pin 1
System Case Connections
USB3 USB4
Pin 1
Pin 1
USB Port Headers