Advertisement
Quick Links
Installation Instructions
V1.0
PSSM01
Thank you for choosing our product! We strive to provide the best quality
and services for our customers. Would you kindly share your experience
on Amazon if you are satisfied? Should you have any issues, please don't
hesitate to contact us.
Telephone：1-800-556-6806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/JP/AU)
Advertisement
Related Manuals for Perlesmith PSSM01
Summary of Contents for Perlesmith PSSM01
- Page 1 Installation Instructions V1.0 PSSM01 Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us.
-
Page 2: Important Safety Information
We hereby disclaim any liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product. •DO NOT INSTALL INTO DRYWALL ALONE. •Please check www.perlesmith.com for more products and company information. Tools Needed (Not lncluded) Stud Finder... - Page 3 Hardware for Attaching the Arm Assembly/Wall Plate to Wall Lag Bolts Wall ST6.3*50 Anchor CAUTION! These anchors are for concrete or brick walls ONLY. DO NOT use them in drywall or wood studs. Step 1 Attach the Wall Plate [01] to Wall For wood stud installation, follow STEP 1A For concrete installation, follow STEP 1B Step 1A...
- Page 4 1A-1 Use a stud finder(not included)to locate wood studs. Mark the edge and center locations. Position the wall plate[01] at your desired height and line up the holes with your stud center line. Level the wall plate and mark the holes.
- Page 5 Step 1B Solid Concrete or Concrete Block Option WARNING: ●Avoid potential personal injury or property damage! ● Any material covering the wall must not exceed 5/8 in. (16 mm) Wall ● Minimum solid concrete thickness: 203 mm (8 in.) Anchor ●...
- Page 6 1B-3 Screw the lag bolts [A1] into the pilot holes using wrench [02] until 4mm of the bolts are left. Step 2 Secure the Wall Plate [01] to Your Sonos PLAY: 1 Speaker...
- Page 7 Step 3 Hang your Speaker onto the Lag Bolt...
- Page 8 Step 4 Adjustment The speakers can be swivelled and tilted using wrench [02] if needed Tilt...