Operation; Menus; Automatic; Range - Eagle MagnaView Installation And Operation Instructions Manual

Eagle magna magnaview sonar: user guide
Table of Contents

Advertisement

ID feature is on. The depth range displays on the upper left side of the
screen. On the screen at the bottom of the previous page, the range is from
0 to 60 feet and the bottom depth is 37.3 feet.

OPERATION

MENUS

The MagnaView and MagnaView Plus use menus to guide you through the
unit's functions and features. The menu key accesses these features,
allowing you to customize the unit to your particular needs and water
conditions. All you have to do to leave one menu and enter another is press
the menu key repeatedly. If you ever get lost in the menus, simply press
the ON/CLEAR key. This clears the menus from the screen.
Menus change depending on the mode the unit is in. For example, if the
automatic mode is turned off, the sensitivity menu changes from "AUTO
SENS" to "MAN SENS." Other messages may appear in menu boxes or
new menus can appear, again depending on previous selections.
On the screen shown on the previous page, the lamp menu is showing.

AUTOMATIC

When the MagnaView is first turned on, the
automatic feature is enabled. This feature
automatically adjusts the unit's range and
sensitivity according to water conditions. It
always keeps the bottom depth displayed in
the lower portion of the screen.
To turn the automatic feature off, press the
menu key until the AUTO/MAN menu ap-
pears. Now press the down arrow key. This
highlights the letters "MAN." The unit is now
in the manual mode. Wait a few seconds and
the menu will scroll off the screen's left side.
Pressing the ON/CLEAR key also clears it. To turn the automatic feature
on again, repeat the above steps, except this time press the up arrow key.

RANGE

You can't adjust the range when the MagnaView is in the automatic mode.
It is adjustable when the unit is in the manual mode, however. To do so,
first put the unit in the manual mode. Now press the ON/CLEAR key to
clear the screen. Then press the menu key until the "RANGE SEL" menu
appears as shown below. The current range shows at the bottom of the
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Magnaview plus

Table of Contents